Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1

    just chanaged oil but pressure seems a bit high...

    Just changed oil and everythings hunky dory, but the pressure seems higher than it used to be. Its about 4bar at 70mph in fifth. bit high? temps about 80...

  2. #2
    Forum User Rich's Avatar
    Join Date
    Feb 2005
    Location
    Sheffield - Rich aka BIG BIRD!
    Posts
    2,682
    first time i've heard anyone complain about high oil pressure!

  3. #3
    not complaining

  4. #4
    just wanted to kno whats normal

  5. #5
    Forum User Rich's Avatar
    Join Date
    Feb 2005
    Location
    Sheffield - Rich aka BIG BIRD!
    Posts
    2,682
    its a very variable figure but book figures are 3bar at 3krevs iirc (when warm obviously) usually it can be owt between 4-6k from cold (at idle) and can idle when warm at anything from 1 bar down to showing 0 on the guage. my old valver used to see about 4-5 bar max when giving it some serious stick but never had any knocking issues

  6. #6
    well at 60mph (think thats 3k) its dead on 3 which is good.

  7. #7
    Forum User Rich's Avatar
    Join Date
    Feb 2005
    Location
    Sheffield - Rich aka BIG BIRD!
    Posts
    2,682
    i agree mate, seems very healthy. lots of things can affect it though like the oil filter, oil used ect. but seems good

  8. #8
    What oil did you use? 5w40? 10w40?

    If you used a 10w50 or something then it'll be thicker when hot, therefore might give higher pressures

  9. #9
    ten 40 i tihnk....

  10. #10
    bigger is better


 

Similar Threads

  1. Replies: 5
    Last Post: 06-02-2010, 03:57
  2. very high oil pressure 6bar!!!!
    By valver_Karl in forum Mechanical
    Replies: 36
    Last Post: 28-05-2008, 01:39
  3. HIGH OR LOW ?
    By LEEDASH in forum Mechanical
    Replies: 7
    Last Post: 08-12-2007, 16:23
  4. Steering Rack High Pressure Metal Pipe Please
    By cliolord in forum Wanted
    Replies: 6
    Last Post: 22-09-2007, 13:14
  5. Very high fuel pressure
    By NAPLES VALVER 123 in forum Mechanical
    Replies: 1
    Last Post: 21-07-2007, 15:04

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •