I would have thought that a longer final drive ratio would have affected all the gears? But I might be wrong.
I'd definitely be interested in finding a more relaxed 5th gear though - cruising at, ahem, 3 figures is a noisy and thirsty affair! lol
I would have thought that a longer final drive ratio would have affected all the gears? But I might be wrong.
I'd definitely be interested in finding a more relaxed 5th gear though - cruising at, ahem, 3 figures is a noisy and thirsty affair! lol
Final drive ratio has effect onto all the gears.Originally Posted by white16valver
my dialogys just wont give me an JB3-048 !
got the part number for it from an old system but its an old number which doesnt work anymore
so if 5th affects all the gears, does that mean my car would be slower??
"5th affects all the gears" No! 5th gear doesn't affect all the gears, that's an "independent" gear. If you change it it'll affects only in 5th gear.Originally Posted by BRUN
The final drive ratio affects all the gears. The final drive ratio is the ratio of the driven shaft. In your case (Renault - FWD car) it is the ratio between the output shaft of the gearbox and the crown wheel (or cog/plate wheel which is the correct name in English?) of the differential. So if it's longer (for example 3.5625 instead of 4.06) the acceleration will be reduced in all gears but the (theoretical) top speed will be higher (in all gears). (That's an other question the the pulling power will be decreased by the longer FDR therefore (probably) the real top speed in 5th gear will be lower). At a given speed (for example 60 mph), the rpm will be lower in all gears (compared to a shorter final drive ratio).
A shorter final drive ratio has an opponent effect.
If you use a longer 5th gear it'll have same effect as above but only in 5th gear.
I hope you don't think I want to reason or something
im such a numpty !!!
its dawned on me today what the JB3-S-24 actually is
its a refurb of either an 091 or 053 box, it isnt a JB3-024 as i first thought, and both of those boxes are used on valvers so ive nothing to worry about !
lol
Oh well, prompted a bit of useful discussion! :D