williams dogbone

[doug2.0]

bought some powerflex dogbone mount bushes and my car is fitted with the RSI one


so im after the correct williams 16v one which is a different casting







cheers all

[MatBrown]

I have one.


Mat.

[stevie_b]

That looks familiar And that's not an RSi one, that's a valver one But yeah, you'll need a different one to fit the bushes properly.

[doug2.0]

so the top one is a valver one? im worried now why would my williams2 have a valver dogbone? where is the engine plaque that says F7R located? i couldnt find it when i had a look today.

bought the one i need off matbrown so hopefully should get it done this week, helps having 2 castings as well so the car wont be out of action for long

[Coops]

thats not valver, valver is same as the williams one mate

[stevie_b]

Look, we've been through this The picture above is mine. It's a valver bone, since it is off a valver I have had for 11 years, so noone has switched it to my knowledge. The part number stamped on it is the same as the 'normal' valver/Williams one that will fit the bushes, so my guess is they changed the shape of the part at some point towards the end of the cars run? He'll need to get hold of the earlier shape one, like I did.

[Coops]

ah right, never realised yours had a low rate valver dogbone on it