Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1

    On Board Diag info - HELP

    What OBD software does the clio have?
    If you plug the car into the diag machine what info can you get a readout on from the ECU?

    Speed as cars driving
    Tacho
    Fuel
    Volt meter status

    Help needed?

  2. #2
    Forum User
    Join Date
    Sep 2004
    Location
    The Ultimate Driving Machine.
    Posts
    6,323
    yeah can read vehcile speed but i think clip displays it in KM

    can also see

    rpm
    voltage to ecu
    ign advance
    fuel flow(i think)
    lambda sensor voltage
    lambda heating is going active/inactive
    fuel richness etc

    tbh clip reads alot just right now cant remember them all, not put it on my mk1 for a few month now!

  3. #3
    Thanks for the post

    So what exactly is clip? A wire that connects to PC software? Can you buy it? and whats the likely cost?

    I am looking at building a virtual dashboard for the Valver that will show as many parametres as possible

    I.e road speed, tacho and fuel level plus volts etc.

  4. #4
    Forum User
    Join Date
    Sep 2004
    Location
    The Ultimate Driving Machine.
    Posts
    6,323
    sorry forgot to say, Clip is renaults diagnostic laptop not ideal for carrying around everyday in the car lol

    but basicly it connect to the diag socket in the fusebox under dash and links to whats is called a CAN which is then connected to the Clip,

    once connected you can then go into any of the cars computors(on a mk1 sod all lol)

    read the parameters ie rpm/speed etc or earse faults, reprogramme etc etc

    i know the ford focus RS lads can get a scangauge 2 which plugs into the diag socket and gives rpm/temps/speed/mpg etc and is a smaller sized handy screen
    no idea if they have the software for mk1 clios though!

  5. #5
    how do i find out more about this link interface as i want to be able to take reading from the diag port

  6. #6
    Forum User
    Join Date
    Sep 2004
    Location
    The Ultimate Driving Machine.
    Posts
    6,323
    if you mean the scangauge best looking on google etc im sure they will have a site for it

    as for Clip, tbh its not something i have ever looked into as never needed too, to buy a Clip you talking around 3k for Clip basic

  7. #7
    the early clios dont use OBD or OBDII diagnostics

  8. #8
    Forum User
    Join Date
    Oct 2004
    Location
    Aberdeen
    Posts
    1,956
    Doesn't fastchip do some kind of on board engine readout thingy?

  9. #9

  10. #10
    Forum User Allan's Avatar
    Join Date
    Mar 2005
    Location
    Williams land!
    Posts
    2,509
    do they plug stright into the dataport then ?

    or do you require some fastchip piggy back ect...?

    look much like the Greddy infometers you can get for jap cars but look cheaper with less functions


 

Similar Threads

  1. Fast chips mid board
    By Mikeb185 in forum Wanted
    Replies: 7
    Last Post: 11-06-2012, 20:51
  2. Williams number 125 - Known to the board?
    By -=FUBES=- in forum WilliamsClio Discussion
    Replies: 4
    Last Post: 04-12-2010, 17:22
  3. Dash board lights
    By Dancliovalver in forum Mechanical
    Replies: 14
    Last Post: 18-03-2007, 20:40
  4. spec board thingies for FCS
    By Martin in forum Website Feedback
    Replies: 8
    Last Post: 17-02-2006, 12:47
  5. How about adding some other board colour options?
    By kj16v in forum Website Feedback
    Replies: 3
    Last Post: 11-11-2005, 11:01

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •