fao clio turbo owners

[MAXIBOY]

mine doesn,t knock either mate...

also running a 2.5 mongoose system though have been advised 3 might be the way to go soon.

[thelynx]

What sort of tirque and power can you get from a f7r..

Lets say for instance

Steel rods and low comp pistons but standard head and cams. Maybe running a t28. What would you expect from it?

[MAXIBOY]

250bhp...220ft/lb

with my spec 350bhp and 300ft/lb torque is what i,m aiming for....without the nitrous.....

[cliolord]

250bhp...220ft/lb

with my spec 350bhp and 300ft/lb torque is what i,m aiming for....without the nitrous.....

that is mental dude you have got to get it to pod!

[Coops]

What sort of tirque and power can you get from a f7r..

Lets say for instance

Steel rods and low comp pistons but standard head and cams. Maybe running a t28. What would you expect from it?

mine ran 217bhp and 178lb/ft on low boost, so totally standard engine internals

[thelynx]

What sort of tirque and power can you get from a f7r..

Lets say for instance

Steel rods and low comp pistons but standard head and cams. Maybe running a t28. What would you expect from it?

mine ran 217bhp and 178lb/ft on low boost, so totally standard engine internals

So with uprated internals and more boost could se some nice figures.. How restrictive do the inlets become?

[MAXIBOY]

not so much the inlets but cams with more lift are the next mod.

i think if your after more power as the turbo overcomes the inlets but can produce more power if there open further.

[Coops]

setup i have now should be good for 320bhp, and thats just with pistons, no other engine internal mods. standard rods should be good to 350bhp, but no-ones tried i dont think...........yet!

[thelynx]

setup i have now should be good for 320bhp, and thats just with pistons, no other engine internal mods. standard rods should be good to 350bhp, but no-ones tried i dont think...........yet!

Im liking the sound of this..