Hybrid rr results....

[jay s]

me and midge have just had our cars remapped at hillpower, midge needed his doing as he just had his new cams timed by stan, i needed mine doing as it was running slighty lean. Both were finished today, midge made 149 atw and i made 144 atw ( although the corrected power figs are 1bhp difference as u will see below, same as torque )
here are the graphs :
mine..




mine vs midges, mine is the solid line and midegs is the --- one

[Andy P]

Dannys hybrid must have cams

Seem to go any better now mate?

[midge]

with mine laid over jays the figures shown are at his highest bhp, this my graph

[jay s]

Dannys hybrid must have cams

Seem to go any better now mate?

lol yeah its got something init i know that much im thinkin headwork as it doesnt sound cammed. but yeah mine seems to be going alot better now, i reckon 13's are possible now

[BRUN]

how much was the remap ?

[Laine_16v]

Nick charges £350.

[jay s]

here the specs for the engines :

mine....
2.0ltr F7R Williams engine
piper 270 fast road cams ( timed for smoothness and good idel rather than top end power )
Supersprint 4-2-1 exh manifold
piper pullies
mongoose exh system and decat
foglight airfeed to std airbox
hillpower stage 2 chip mapped to mods and engine, 7.3k limit


Midge:
2.0ltr F7R Williams Engine
Cat Cams 225 ( timed for top end power )
williams 4-1 exh manifold
piper pullies
powerflow exh system with decat
foglight air feed to std airbox
Hillpower stage 2 chip mapped to mods and eng with 7.3k limit

[Mick_RSC]

Whos round is it? Sorry for a minute i thought we were down the pub.

[FATBOY]

Whos round is it? Sorry for a minute i thought we were down the pub.

what are you going on about????

[Andy P]

here the specs for the engines :

mine....
2.0ltr F7R Williams engine
piper 270 fast road cams ( timed for smoothness and good idel rather than top end power )
Supersprint 4-2-1 exh manifold
piper pullies
mongoose exh system and decat
foglight airfeed to std airbox
hillpower stage 2 chip mapped to mods and engine, 7.3k limit


Midge:
2.0ltr F7R Williams Engine
Cat Cams 225 ( timed for top end power )
williams 4-1 exh manifold
piper pullies
powerflow exh system with decat
foglight air feed to std airbox
Hillpower stage 2 chip mapped to mods and eng with 7.3k limit

So pretty much just the manifold thats different, wonder if valver manifold is the way to go