cut the old rubber centre out then carefull cut through the outer ring of the bushe, this will allow it to be freed off and pushed out!Originally Posted by pat_986
cut the old rubber centre out then carefull cut through the outer ring of the bushe, this will allow it to be freed off and pushed out!Originally Posted by pat_986
1. Pat - posted
2. Ratboyvalver - posted
3. MatBrown - posted
4. Jay s - posted
5. paush - posted
6. BRUN (Collected)
7. ClioDan87 - posted
8. Gaztwo - (Collected)
9. cliokongen
10. Dave H - (Collecting tonight)
11.
I have one spare dog bone mount if anyone wants it.
Please let me know guys.
Hey all
Fitted mine yesterday. Was very easy getting the bushes out, just used a vice.
Now it fitted, along with a R19mount, it has made a noticeable differance, with much less movement to the stick, still have a bitof play but a lot less.
Only slight negitive is I think I can fell more vibration when pulling away, will check its not the mounting bolts on the downpipe, but to be honest i'm sure its not touching
Overall I'm very witht the results.
Also I have noticed a few of you guys have found you have the wrong mount, with a smaller 'larger mount' as I have both types, I have taken some pis for your info.
Cheers
Pat
id be interested if there is another run
Did you manage to sort getting the right one for me matey?