now own a willy 2 "few problems"

[flat-eric]

ok got my lil williams today, chuffed with it but needs a few little bits.

the exaust is blowing where the maifold joins the rest of the exhaust.

any ideas where i can get one from?

[MAXIBOY]

think theres a gasket there if you taking about the downpipe. if its blowing due to rust holes then secondhand i think.

[Crossers]

Where the mahifold joins the downpipe, or where the downpipe meets the Cat (if it has 1)??

Paul

[flat-eric]

where manifold joins downpipe. cost?

[MAXIBOY]

leaking on the joint or on the pipes

[flat-eric]

not sure looks like it could be both, how much for afermarket?

[MAXIBOY]

after market manifolds are expensive and the super sprint doesn,t have a good rep. prowler is better but not cheap.

http://www.k-tecracing.com/show_product.asp?id=380

think the k-tec one is a supersprint. 300 +vat

[Crossers]

There's a few williams being broke at the mo, look in the cars breaking section and see if there's a downpipe etc available.

Paul

[flat-eric]

how much for a new gasket? thingy?

[drsmith1979]

virtually guarenteed to be the actual manifold thats cracked where the 4 branches meet, you can get a brand new fire ring for circa 30quid from a dealer, special order, not sure on costs of welding, i would say around 30quid to have someone weld the cross sections. i did mine not long back and changed the fire ring, manifold gasket and it was superb. you could try to reseat the downpipe - manifold to see if thats a problem, but a leaking firering is rare on its own with no problems as far as i am aware.