ph3 clio maxim 1400cc

[Caine]

Engine
1.4 8valve E7J
67,000 miles!

Transmission:
Standard clutch.
Standard Gearbox.

Modifications:
2.5" long life exhaust.
Bosal Centre section


Brakes:
Standard Front Discs with ferodo pads.
Standard back drums.

Suspension
Lowered 45mm at the back
JR suspension dampers

Wheels & Tyres
Ripspeed Multifit alloys

Exterior
Window Tints
Front : Medium Smoke
Back : Dark Smoke

Interior
Full ph2 valver interior inc doorcards
Ripspeed gearknob ( hate it but cant get it off)
Stealthshelf

the timeing belt was also done at 66,870 miles along with all aux belts

It is also being serviced today...this will include new spark plugs new oil and filter new air filter and anything else it needs...the brakes will be checked and the rear drums cleaned

the car also has a snapped wheel bolt on the front passenger side hub AND a the wheel bearing has gone on the front drivers side but as i say if the price is right 2 16valve hubs will be included










valver wings ;)



also if the price is right i will include everything i have for as parts for the car...

16valve tungston wings
16valve tungston mirrors with the temp sensor
standard shocks ( jr suspension shocks on the car)
16valve front hubs both sides
maxim parcel shelf with 6 x 9 holes
extra window tints all 4 sides fronts are light smoke
backs are medium smoke
i also have a spare drivers side wing in monaco and i have 2 spare arch liners for the wings both passenger and drivers/
Race x air filter brought for £30 and used once
green cotton air filter was on the car when i got it but was taken off and standard filter was put on
16valve extended dashboard/oil dials and speedo
ph 2 valver ecu
and spare wheels...one has a fcuked tyre the other has an ok tyre

£offers

Thanks!

[Plattsy]

any idea on a price and where u located?