Williams wishbones and ARB.

[northy]

there is a plate that fits on the inside of the wishbones thats the ball joint bolts go through on a williams.....

[stevie_b]

Will I get that plate in it if I ask for the Williams wishbones from them? Has anyone got a GSF part number from a previous purchase so I can make sure I'm requesting the right thing? Thanks

[northy]

no steve. u need to use the existing plate

[nath]

so you would need to get the plate off a willy wishbone, so would make sense getting willy wishbones in the first place? does the 19 have a strengthening plate too? are the ball joints the same as a willys?
I would presume the 19 16v set up would be identical to the williams set up for manufacturing cost purposes...... but we are talking about reno here

[Clio_GTT]

no steve. u need to use the existing plate

my GSF wishbones came with the strengthening plates

[AndyFielder]

were those williams or 19 wishbones?... from GSF

[Clio_GTT]

were those williams or 19 wishbones?... from GSF

R19

[AndyFielder]

ok, sounds good!

someone mentioned the 19 ones have a slightly different angle on the ball joint, so they fail more regularly.

Andy

[nath]

I heard that too ^^^^ can you buy willy ball joints speratly?

[AndyFielder]

cose you can!.. about £12 each i believe.