dark green turbo injectors

[REN GT]

hi all

this is probebly one for the turbo boys but any help would be great..

i'm doing a high boost turbo conversion and i'm going to use the 803 dark green injectors, i know you have to modify something on the injectors, the fuel rail or maybe just the injector rubbers.. cos they don't fit straight in

or maybe i'm just doing something wrong :(

hope someone can help

[wavy]

bump

sorry aint gota clue :D

[MAXIBOY]

yes you have to modify the injectors rubbers where they sit in the head with larger rubbers.

[REN GT]

cheers mate

i compared them with the old injectors and noticed that the rubbers were much bigger, so thats cool if thats all i got to change.

[northy]

Might be a good time to get new rubbers rather than using the old ones.

[Coops]

neil which injectors u run then? mine are the normal green jobbies which according to andy will be laffin for many many horses right? :P

[MAXIBOY]

yes mate 804,s are good for at least 450bhp in this configuration.

[Coops]

shud just about cope with my lowly 250 then!

on this subject what shud i set FSE valve to aswell? o/e is 3.0 Bar right?

[MAXIBOY]

comes set then only needs adjusting when being rolling road.

[Coops]

doubt mine will be set mate, gettin arrons old one for a smite less damage to my wallet!comes with a gauge tho?