Its been mentioned a few times lately but I was wondering if I'd need to use a megane downpipe/decat wuth the megane manifold? Or does the williams one fit?
Mike
Its been mentioned a few times lately but I was wondering if I'd need to use a megane downpipe/decat wuth the megane manifold? Or does the williams one fit?
Mike
you need to use a modified megane downpipe, or make one from scratch.
Yep, you have to use the meggy downpipe, thats the point of the conversion.
Minor mod needed to it.
Paul
looking to change my manifold, so just wondering what mod is required and whats the benefits?
the angle of the pipe and the poisition of the flange needs altered slightly.
The megane downpipe is frankly an awful piece of work. The 2 secondaries merge and the merge is so bad that I cannot fathom who designed it that badly.
Also the weld along the top on the pipe cracks or gets pin hole leaks I have found.
Well the downpipe Ive just received looks in good condition, had no experience of them before so only time will tell!!
The manifold, from what Ive been told, gives the gains you get through a stainless stell item without the problems of cracking and other related problems like with the supersprints.
In terms of modding the flange, a vey good source tells me that you have to chop the bottom of the downpipe, rotate it and weld it back on.
Mike
keep us posted mikey
i will do bud!
Here are a couple of pics as a comparison to each other.
I'll hopefully be having the welding done on monday.
Mike
Does anyone think I will be okay just roatating the flange slightly so it matches the 16V one (going north to south instead of South-West to North East)...
Or will i need to bring the megane downpipe across to the left a bit more as it doesnt appear to come towards the left as much as the 16V one.
For those that don't know, the Clio item is one the left, the megane item is on the right.
Mike
is that a lambda boss on cylinder 1