how to convert a 1.2 to 1.8 16v with ps

[midge]

right i dropped the engine out of the white valver today, took it out on the subframe with all wishbones e.t.c attached, also took the column from the valver..

am i right in thinking that to convert a 1.2 to a valver all i need to do is lift this lot up into it and put the column in, plug the brown plug together, and it should all work?

[richy]

u will need a unlocked 16v ECU, but it should work, the only thing is sometimes the pins on the brown plugs are different from pahse to phase etc, so u may need to find out which is which etc and swap them about

[midge]

i have the ecu/key with plip and sensor, lookin forward to doin this!

[richy]

be much easyier with a unlocked ECU tbh, but if u have everything off the other car then your laughing!