Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Banned
    Join Date
    Apr 2007
    Location
    northants
    Posts
    236

    Williams oil pressure gauge

    Drove my williams for the first time properly lastnight, but found the pressure gauge wouldn't work, well it did but would only go up for 1bar, the car's been stood for around 8 months, and ive just put fresh oil in it so know some's there

    between the three gauges in the middle only the oil temp (middle) worked which was around 100 C

    any ideas, can i change the sender unit? Or could it be clogged with old oil?

    any help appreciated

  2. #2
    Forum User Clio_GTT's Avatar
    Join Date
    Dec 2005
    Location
    Formerly known as willy lover
    Posts
    1,691
    I'd compression test the engine or do a leak down test to make sure everything is fine

  3. #3
    Banned
    Join Date
    Apr 2007
    Location
    northants
    Posts
    236
    god didn't know it was that drastic!!

  4. #4
    Forum User Rich's Avatar
    Join Date
    Feb 2005
    Location
    Sheffield - Rich aka BIG BIRD!
    Posts
    2,682
    its probably not tbh. the pressure can vastly be affected by which filter you put on. the most likely solution is new senders as they are only electrical ones anyway. oil level only flicks on at start up for around 20 seconds. if its doesnt work then again the sender wants changing

  5. #5
    Banned
    Join Date
    Apr 2007
    Location
    northants
    Posts
    236
    so the oil level is the gauge on the left? ill check tonight

    could anybody tell me where the senders are for them all

  6. #6
    Banned
    Join Date
    Apr 2007
    Location
    northants
    Posts
    236
    Quote Originally Posted by peteh
    so the oil level is the gauge on the left? ill check tonight

    could anybody tell me where the senders are for them all
    also it's a fram filter :D

  7. #7
    Forum User Rich's Avatar
    Join Date
    Feb 2005
    Location
    Sheffield - Rich aka BIG BIRD!
    Posts
    2,682
    the pressure can depend on if it has a non-return valve on the filter or not.

    the one on the far left is the one for level yes. the level and temp is a combined sender located on the front of the block towards the right hand side it screws into the block just above the level of the sump. it is not unusual for one to work and not the other. the pressure sender is located on the back left of the block and also screws into the block if you follow the path of the rear engine lifting eye down its underneath that

  8. #8
    Banned
    Join Date
    Apr 2007
    Location
    northants
    Posts
    236
    thanks very much!!!!!!

    is it worth changing the filter then to a genuine one?

  9. #9
    Forum User Rich's Avatar
    Join Date
    Feb 2005
    Location
    Sheffield - Rich aka BIG BIRD!
    Posts
    2,682
    tbh i found my car gave better oil pressure with a halfords own filter. saying that i prob got the wrong filter given to me by renault but yes it is worth getting a genuine item to eliminate a problem for the sake of a few quid

  10. #10
    Forum User Clio_GTT's Avatar
    Join Date
    Dec 2005
    Location
    Formerly known as willy lover
    Posts
    1,691
    compression test sounds drastic but its quicker to compression test it than change the oil filter

    agreed filters can change the pressure but if the car never sees over 1 bar i'd be worried


 

Similar Threads

  1. Oil Pressure Gauge - Non-standard
    By manxseven in forum Performance/ECU Tuning
    Replies: 9
    Last Post: 12-10-2010, 23:05
  2. Fuel Pressure Gauge
    By Coops in forum Mechanical
    Replies: 15
    Last Post: 07-07-2010, 02:21
  3. Oil Pressure gauge
    By Greg_99 in forum Mechanical
    Replies: 5
    Last Post: 05-07-2008, 19:29
  4. oil BAR pressure gauge
    By john_petchey in forum Mechanical
    Replies: 6
    Last Post: 14-10-2006, 11:00
  5. Oil Pressure Gauge not working....
    By BigChris in forum Mechanical
    Replies: 3
    Last Post: 22-09-2005, 14:00

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •