inlet manifold difference

[NAPLES VALVER 123]

is there different ones?

Ive got a polished one from a 94 valver which i was going to put on the 95 willy engine. when i looked at them i noticed there different on the side theres two vacum hoses unlike the one hose on the valver one.

also on the bit nearest the engine block theres different pipes?

so are they different or can they still be fitted are the pipes different?

Also i noticed that the water pipes are differnt on the valver theres one hose going in towards the oil filter but on the willy engine theres two?

will the valver pipes not fit onto the williams?

any help

[Laine_16v]

Williams and valver inlet manifolds are the same.

Your valver one must be an R19 item?

[snowman]

If the main pipe that goes to the airbox is bent downwards its valver/williams,if it goes straight across its a 19

[NAPLES VALVER 123]

there bent down on both of them.

it looks as if there are the ame amount of houses to manifold but in different places?

[MatBrown]

there bent down on both of them.

it looks as if there are the ame amount of houses to manifold but in different places?

Yes, there are a couple of slight differences in the clio ones.
Should fit fine tho.


Mat.

[Coops]

only difference in clio ones i've ever noticed is the small diameter vac connections for charcoal canister and that, but few extra bits of tubing n problem solved!

19 is totaly different casting, wont fit with airbox in a valver bay

[NAPLES VALVER 123]

so the one ive got should fit fine just got move pipes around a bit?

[Coops]

i'd say so yes, pop a pic up to be sure, but if it looks the same casting, as in the bit where the i/k or airbox bolts to is in the same place and theres a feed from the top for the ISCV same as the one on the car then laffin

[richy]

yeah as pointed out there is a couple of differences in the clio manifolds, one of mine the vacuum feed outlet is on the side not the middle like on my williams!

[NAPLES VALVER 123]

here are the pictures, this one is what ive took of the williams and isnt the one that is going on
below where there is the one vac pipe theres two,

on this one where it shows two pipes the one ive got as one



so it look as if there the same just pipes in different places?

any pictures of which vacuum pipe goes where would be a great help