do these look ok for the two i need for the brake servo and inlet to rocker for my turbo conversion?
http://cgi.ebay.co.uk/10mm-NON-RETUR...QQcmdZViewItem
instead of these
http://www.bbperformancetuning.co.uk...t.asp?id=70855
do these look ok for the two i need for the brake servo and inlet to rocker for my turbo conversion?
http://cgi.ebay.co.uk/10mm-NON-RETUR...QQcmdZViewItem
instead of these
http://www.bbperformancetuning.co.uk...t.asp?id=70855
hehe..
right im using r5 turbo gtt ones.. ther5 ones perfectly fit the brake servo line....and are probably available in abundance.....
pics please?
i have none.. i'll have a play with dialogys.. its plastic...i also have an audi tt one..
the garden pond valve may work lol
hmmm, cheap tho.
just sent a few messages to the ebay renault 5 breaking boys
need pics of where they go on the brake servo?
right at the top!, the guy i bought mine off left an inch of the old pipe on so I can just disconnect the servo pipe and place the valve in the end of it then the 1 inch coming out of the other end in the black metal pipe.
e z
lewis .. there are 2fitted to the r5gtt.. a brass oneand the plastic one fitted to the servo pipe. you will need both. naturally the brass one goes on the inlet to rocker pipe.
part number =£20+from £re£nault£