Bucket seat subframes

[VIPERONE]

i have a pair of cobra buckets and subframes specifically for the clio mk1/cobra seats.

I have removed the willilams 2 seat runners and nothing lines up at all!

are there differences between the ph1 and ph2 runners!?

[bass_direct]

yeah there are differences..

[Clio_GTT]

yeah there are differences..

Really ? I can't see the shell being different and i know of lots of people sticking phase 2 seats into a phase 1 etc

[VIPERONE]

the mountings are the same... the runners i presume are bolted on to the ph1 / 2 seats in different locations

[Clio_GTT]

the mountings are the same... the runners i presume are bolted on to the ph1 / 2 seats in different locations

Do you still use parts of the clio runners then ?

[VIPERONE]

the runners unbolt from the actual seat mechanism then you bolt the sub frames to the runners..however mine dont line up lol

[bass_direct]

yeah you can stick in phase 2 seats in phase 1 etc, as the shell of the car is the same, but the actual runners that bolt onto the seat are in slightly different positions, for example bolting a williams seat (which are all phase 2 seats) onto a phase 1 frame will not work...

[jay s]

yep ph1 and 2's have diffferent mounting holes where seats mount to runners. gunner i had exactly the same problem with the sparco subframes, i have ph2 runners and they did'nt line up so i had to take a drill to the nice new subframes to make them fit :D

[VIPERONE]

I love it when a plan comes together

[Swervin_Mervin]

yep ph1 and 2's have diffferent mounting holes where seats mount to runners. gunner i had exactly the same problem with the sparco subframes, i have ph2 runners and they did'nt line up so i had to take a drill to the nice new subframes to make them fit :D

<thread hijack>

Jay, where'd you get the Sparco subframes from? Got a set of Torinos to fit and mine's a ph1.