Originally Posted by
.GUNNER.
9) Once the pedal is on ( you will be quite pissed off by this point Smile ) you need to put the metal bracket over the bar and then push the new clip on so it is all locked in place. Then put then nuts back on the screws for the support place and do them up.
10) Reattach the clutch cable and put the plastic cover + headlight alignment thing back on. Now connect up the clutch cable to the gearbox again.
11) Slowly push the clutch pedal down, you will hear it clicking as the ratchet tensions up. This is normal and because it is new. The pedal should feel firm and not sway,move or click once the pedal is at the correct tension. If it does, seek advice on here or admit that you have done something wrong. If it is the latter, Repeat this process and check everything is fitted correctly.
Hope this helps some people.