Wheel offset?

[mikeymikewakey]

Whats the offset and figures for the standard willy or 16v wheels?

i think its an "e" number is it?

pcd100 aswell is it?

Cheers

Mike

[Alphacentaure]

Whats the offset and figures for the standard willy or 16v wheels?

i think its an "e" number is it?

pcd100 aswell is it?

Cheers

Mike

100 pcd for certain. Now I would have thought it was 15 J 7 for the willy?

[Joel]

PCD: 4 x 100

ET Offset: 36

Cente Bore: 60.1

[mikeymikewakey]

Thanks, theyre definetly 7J?

[Alphacentaure]

sorry dude ignore that. blonde moment, I can't read.

[mikeymikewakey]

LOL, im still non the wiser like...haha

[Clio_GTT]

LOL, im still non the wiser like...haha

PCD = 4 x 100, this means there is 4 holes and the opposite studs are 100mm apart

Offset = ET36, this means that the face of the wheel that mates with hub is 36mm away from the centre line of the wheel. ( I think the clio is actually -36mm)

Centre Bore = 60.1mm, this is the hole size that goes on the hub

Width = 7J, this is simply 7 inches



If you ran a wheel with an offset of ET 40 the wheel would sit 4mm inwards, if you ran a wheel with offset ET 20 the wheel would sit 16mm outwards.

[1995clio16v]

Whats the offset and figures for the standard willy or 16v wheels?

i think its an "e" number is it?

pcd100 aswell is it?

Cheers

Mike

Are 16v's not 6.5J and williams wheels 7J as stated?

I also read somewhere the Williams 3 increased to 7.5J?

[Clio_GTT]

Whats the offset and figures for the standard willy or 16v wheels?

i think its an "e" number is it?

pcd100 aswell is it?

Cheers

Mike

Are 16v's not 6.5J and williams wheels 7J as stated?

I also read somewhere the Williams 3 increased to 7.5J?

Clio 16v is 6.5j

Williams is 7j

willy 3 isn't 7.5j

[1995clio16v]

Whats the offset and figures for the standard willy or 16v wheels?

i think its an "e" number is it?

pcd100 aswell is it?

Cheers

Mike

Are 16v's not 6.5J and williams wheels 7J as stated?

I also read somewhere the Williams 3 increased to 7.5J?

Clio 16v is 6.5j

Williams is 7j

willy 3 isn't 7.5j

The only reason i state 7.5J mr lover is that Im sure I read it on a review that was scanned onto here?

It was some review that some mush kept saying that the gearboxes were real strong etc, basically he was saying all the wrong things to what we now know.

Everyone on here slated him saying he didnt know what he was on about.

Rememeber?

I just seem to remember on that write up it had all the differences between the williams and the 7.5J was one upgrade on the willy 3.

I may be wrong.

I can't find it!

The search function aint very good on here.

Someone scanned it in, can't remember who though.