Results 1 to 10 of 10
  1. #1
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306

    where are these from

    can,t remember where they came from...













    cheers

  2. #2
    Subscribed Member summeh's Avatar
    Join Date
    Sep 2004
    Location
    Up my own arse
    Posts
    3,677
    The long yellow one looks like the fuel line bracket, under the mount, should screw down on top of the chassis rails, although if you have rerouted your fuel lines you won't need it... also they normally have a plastic cage clipped to them.

    The small hook like one looks like some unimportant hose/loom clip, one on top of the gearbox springs to mind for the loom, as I also have a spare looking like that.

  3. #3
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306
    no i,ve got the fuel one fitted. think they came off the subframe steering rack area.

  4. #4
    Forum User 1995clio16v's Avatar
    Join Date
    Dec 2006
    Location
    Project HYbrid 2015!
    Posts
    1,788
    Bottom right one in the 2nd pic, Im sure that is for the accelerator cable to be kept tight against the bulkhead area?

    Or some cable/pipe around that area.

    Behind the heat shield somwhere?

  5. #5
    Subscribed Member summeh's Avatar
    Join Date
    Sep 2004
    Location
    Up my own arse
    Posts
    3,677
    hmm in that case then the small one could be a pas pipe clip... shot in the dark really... lol, how many nuts and bolts do you have left over?

    I had a freezer bag full of nuts and bolts after my engine swap, and a good few brackets etc that I didn't bother refitting, mainly the inlet manifold ones.

  6. #6
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306
    cheers. no bolts just a few brackets i can,t place. hoped someone would have an engine out a could place them. will check accelerator one tomorrow.

  7. #7
    Forum User Coops's Avatar
    Join Date
    Aug 2005
    Location
    Turbo'd Beastie
    Posts
    9,955
    the 'U' shaped bracket, bottom of last 2 pics, is front bumper bracket from behind the number plate, inside the bumper, bolt goes through it into chassis/subframe to hold the bumper on!

  8. #8
    Forum User
    Join Date
    Nov 2004
    Location
    Previously known as
    Posts
    5,443
    Quote Originally Posted by Coops
    the 'U' shaped bracket, bottom of last 2 pics, is front bumper bracket from behind the number plate, inside the bumper, bolt goes through it into chassis/subframe to hold the bumper on!
    Correct!

  9. #9
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306
    still anyone.

  10. #10
    Moderator
    Join Date
    Sep 2004
    Location
    Hinckley, Leics.
    Posts
    7,816
    Sling 'em in the bin!


    Mat.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •