turbo inlet adapter help

[lewis_willy2]

as some of you no im doing a turbo conversion and fabricating some of own bits. im making this. but need to no the sizes of the pipes so i can order a length of tube and some silicon bends for the iscv and dump valve.

can anyone shed some light on the situation please.

im thinking 1- 1 1/2 inch for the two pipes and 2 1/2 inch for the main pipe from the charge cooler.

http://www.bbperformancetuning.co.uk...ts/i/70697.jpg


cheers lewis

[nyk]

as a rule standard turbo hoses are around 60mm.
around 20mm for the ISCV and DV.

Only exceptions being Ford RS500's which use 3" throttle bodies therefore require 75mm hoses.


Hope this helps.

:D

[lewis_willy2]

lots thaks