turbo bits

[lewis_willy2]

as above. got 800 quid burning a hole in my pocket. got a t3 turbo sat in the garage and a williams which i cannot bring myself to sell cuse i love it soooo much. have just bought a mondeo as a work slag so i may turbo my williams if i can find the parts for the right money.


lewis

[Clio_GTT]

Get rooting through scrappies, you want :

Renault 21 turbo injectors
Renault 21 turbo map sensor

Then try and get the log manifold from abroad for cheap, make up the hose run with silicone from raldes, fittings from think auto, charge cooler from www.chargecooler.co.uk.

then its downpipe, throttle plate, head gasket and chip from bb

[lewis_willy2]

ive just put a little wishlist together on bb.

full rebuild with forged pistons and conrods. and turbo bits.

came to £1900 but i left out things like injectors map sensor and turbo

and the q is. to intercool or charge cool

we'll see what happens. im forever changing my mind. but the williams is a keeper i think and an engine rebuild is a nice challenge.

anyone know of any parts for sale please let me no

lewis

[lewis_willy2]

btt

still on the hunt.

[MAXIBOY]

you don,t need forged rods or pistons to do this conversion really. just if your going to rev over 7500 8000 lots.

[Coops]

ai mines, std internals on 9psi - 220 break pretty much so no slouch!

[MAXIBOY]

think standard rods are good for 350bhp or more as long as you don,t over rev. standard crank 500bhp. decent cast pistons over 300bhp as long as you don,t over rev.

[lewis_willy2]

well looks although i may do it without doing anything to the internals, then i can upgrade in time wen i feel the need for the extra power.


whats the deal with sorting the comp ratio? do i skim the head put thick gasket in skim the pistons??

gonna be ordering some bits by the end of the week.

need contacts for inlet adapter, oil feed, battery box and wire.

shall i charge cool or intercool??

any help please throw it this way

lewis

[Coops]

chargecooler is easier to fit in without rippin bumper etc apart!

i think mine had head skimmed a bit to account for thicker head gasket, keeping the compression std.

[lewis_willy2]

right then ive found this...

http://cgi.ebay.co.uk/ws/eBayISAPI.d...6242&rd=1&rd=1

looks a bitsmall? cant tell if its just the pics or is this what i need?

god its gonna be and endless amount of questions!!!!!