Dyno my clio

[dimkais]

I dynoed today my clio with the help oF Gakisclio my car.This is a video from the dyno but the clio had too much power lose from the intake air as the dyno gives air as 50mph so the engine run extremelly rich about 11 to 1 ratio.So i beleive that in the road has slighty more power to show

http://youtube.com/watch?v=bYUfoEWKv_0

The guy you see is Gakis
Power figures dispite that problem were 250,1hp and 23,5Kgm of torque.
Ah and i was revving only at 8700 rpm and not more

[BenR]

sweet!

nice job!

[wavy]

Ah and i was revving only at 8700 rpm and not more

what can u safely rev it to ?

sounds sweet

[dimkais]

I was revving without problems at 9300 for a long time.So 9k easilly with these cams,otherwise i wouldn't use so wild set up.It would be useless

[cliolord]

what are the modifications

[Laine_16v]

Sick!

[DaveH]

proper power, and those revs

[dimkais]

what are the modifications

Forged pistons (13.9:1 c.r)
forged rods
lightened crank
ARP head bolts
GrA oil pump
Custon cams (312deg with 12.5 lift)
Kent (Chokolate made ) pulleys
kent solid lifters
kent double springs
kent titanium retainers
8 RC injectors (370cc)
50mm throttle bodies
ported head
custom made exhaust manifold (43mm I.D)
uprated leads
uprated ignition coils
alloy shorter water radiator
decat exhaust system 60mm
remappable ECU

and i don't kno if i m forgettin anything else :D

[bill.]

yeah, same spec as mine


quality motor mate

[northy]

Very nice mate - non of your new gearbox ???