Results 1 to 7 of 7
  1. #1

    blowers not working

    hello, can any one help with my double whammy car heater problem?
    The first problem is that the air comming through the blowers is cold, i've heared this is probably the heater matrix, but how hard is this to change? i know the dash has to come off, is that a real nightmare?

    second problem is that for most of the time the blowers dont even work! somtimes they do, but very rarely. it seems to me like its a loose connection somwhere, but i was wondering if this was a common problem, or if there was an obvious place to start looking?

    pls help, i am so so cold!

    thx

  2. #2
    Forum User
    Join Date
    Oct 2006
    Location
    Southend - Essex
    Posts
    602
    easy option is wear another jumper ;)

    fan never worked and i bought the car in september last year. its been cold but not that bad

    lol

    fan problem is probably a bad connection on the back of the switch. they have a tendancy of melting apparently

  3. #3
    Forum User
    Join Date
    Jun 2006
    Location
    13.7 @ 100 MPH / Colchester
    Posts
    679
    take off the front plastic where the wipers are, put ure hand in there and pull the plug out its probably melted as all my clios have had them melt.. + half the 1s in the scrappy had melted as well stupid renaults.

    just go scrapyard and cut 1 off and wire it back on. sorted.

  4. #4
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306
    before you change the heater matrix is the engine getting hot/up to temp.

  5. #5
    thanks. i took the switches out and it looks like one has melted, all brown, nice!

    as for the engine, yes its getting up to temp fine.

    thx for help

  6. #6
    Forum User Dancliovalver's Avatar
    Join Date
    May 2005
    Location
    Pork Pie Land ;-)
    Posts
    2,648
    easy mate how u doin???

    you got any cripms to sort your connection out, if not send me a PM and i will drop you some round with a crimper tool tomorrow :D

  7. #7
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306
    engine temp is fine then prob a blocked matrix as you guessed. dash is fiddly not a major pain though there are a few difficult to find screws. should be able to do it in a day first time out.


 

Similar Threads

  1. Blowers
    By redeye83 in forum Mechanical
    Replies: 0
    Last Post: 04-03-2011, 09:07
  2. earth location for inside blowers
    By neil_w03 in forum Mechanical
    Replies: 4
    Last Post: 24-05-2010, 08:09
  3. Blowers
    By redeye83 in forum WilliamsClio Discussion
    Replies: 6
    Last Post: 01-05-2010, 10:37
  4. blowers just stopped working
    By bendee in forum Mechanical
    Replies: 8
    Last Post: 30-09-2007, 20:51
  5. MSN Not working...........
    By Jamie. in forum Off Topic
    Replies: 6
    Last Post: 02-12-2005, 13:25

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •