Results 1 to 10 of 10
  1. #1

    Advise Please . . .

    Hi All

    Got myself a williams 3 recently, in great order until you look underneath. I knew there was some corrosion underbody but It is worse than I thought. The subframe at the front has been attacked and the tailgate as well.
    I have been underneath today with a wire attachment to my drill to get the worst off and it doesnt look as bad as the photos but I'm not sure if I am wasting my time - should I just replace the subframe ?

    Really welcome your advise - has anyone been through this ?
    Also, how much are subframes selling for ?



  2. #2
    Forum User
    Join Date
    Sep 2004
    Location
    The Ultimate Driving Machine.
    Posts
    6,323
    if it hasnt gone through anywere then id take the subframe off sand it all down and seal/paint it up mate

  3. #3
    Forum User
    Join Date
    Dec 2005
    Location
    wales
    Posts
    6,306
    best buy a second subframe. there cheap. have it sand blasted and powder coated then swap it over. as done here on another thread.

    http://www.williamsclio.co.uk/forum/...ic.php?t=17833

  4. #4
    thanks for the advice guys, that thread is locked for members only but I should be ok when Northy gets my payment

    I am coming from a fairly low level of mechanical ability, to replace the subframe do I need to take the engine out first ? What weight is the subframe carrying ?
    Alos would the Hatnes manual cover this ?

    thanks again

  5. #5
    Forum User 2 live's Avatar
    Join Date
    Sep 2004
    Location
    out there somewhere
    Posts
    7,399
    the subframe carries no weight of the engine mate.

    btm arms, and steering rack are connected to it, but other than removing these, only 4 bolts holdin it on.

  6. #6
    Forum User
    Join Date
    Nov 2004
    Location
    Previously known as
    Posts
    5,443
    get shot of that sub frame...or remve and treat it...if you can push your thumb through, or tap a plastic hammer through it then its got to go

  7. #7
    Forum User Coops's Avatar
    Join Date
    Aug 2005
    Location
    Turbo'd Beastie
    Posts
    9,955
    need to disconnect lower engine mount (called dog bone mount) and gearbox linkage along with power steering pipework and column to steering rack pinch bolt aswell to get the subframe off, doesnt weight 2 much but to avoid excessive damage to anything get a mate to help lower it down.

  8. #8
    Just looks like a rusty rad tray to me. They're all like that, including my rust free one.

  9. #9
    Forum User Coops's Avatar
    Join Date
    Aug 2005
    Location
    Turbo'd Beastie
    Posts
    9,955
    just a rusty rad tray?! are you looking at a different pic than me, my subframe was white under all the grime, thats rust red!

  10. #10
    I've had too much to drink.



 

Similar Threads

  1. Advise?
    By C3 WLM in forum Mechanical
    Replies: 7
    Last Post: 24-10-2010, 17:45
  2. Brakes What ya Think / Advise?
    By Tuccy in forum Mechanical
    Replies: 9
    Last Post: 03-05-2010, 07:35
  3. advise needed please
    By wavy in forum WilliamsClio Discussion
    Replies: 2
    Last Post: 13-02-2008, 01:12
  4. CLUTCH ADVISE
    By evouk in forum Performance/ECU Tuning
    Replies: 17
    Last Post: 30-06-2007, 13:27
  5. CLUTCH ADVISE
    By evouk in forum Performance/ECU Tuning
    Replies: 13
    Last Post: 17-05-2007, 15:27

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •