My valver... 56k go make a cake!

[Danlp6]

well heres the plans and what ive done on my valver since i bought it!

Heres my 96 valver, a few pics of when i picked it up:

I then lowered it by 1 spline on the torsion bar and apex 50mm springs.

Plans to do:
Strip the rear,
Fit the buckets and harnesses from the 172:

Fit the 172 wheels
Repainted in a MAD in your face colour...again
Cambelt
Headgasket is leaking oil, not major though.
Decat
New centre section as its too heavy lol

In time...
Brembo MAX slotted discs

PF97 pads(if still avaliable!)mmmmm B)

Retro-fit 172 front brake setup, comprising of 285mm front discs.
Williams wide track-possibly
Williams engine
cams
And finally ITB's

-------------------
Right, now how it is today from that last list:
I have...
Fitted the 172 wheels:


Changed the gearbox twice now, and this one is on its way out

Stripped it all out, all carpet etc is out, just need to find something to replace the front door cards with...


At the same time I decided to change the steering wheel for a non airbag item:


Ive also fitted a 19 16v 4th gearbox mount:


Ive now got my cams from Coops, all built up and timed up in a ported head:



The buckets are in!



You can see the strut brace my mate welded for me when he was in college, built like a tank LOL

[JJsRT]

Looks like a beast mate, love lairy wheels! Top bombing my friend!

[MAXIBOY]

have you got photo,s of the seat mounts please

[Danlp6]

i will when ive made up some proper ones! ive only got temporary mounts in at the mo!

[Coops]

good work mate, got a lot more done with the cams than i ever did!

[dan 16v]

looks good mate

also nice six bananas in the boot!

[Justin..]

do 172/182 hubs fit clio's then ?

[Justin..]

do 172/182 hubs fit clio's then ?

and by clio's i meant mk1's before any smart arse comments

[stan]

I dont think they will at all.

Besides..your better of using the 172 discs, and fitting 4pots...far less un-sprung mass, and bettr for track use.

[Joel]

Looks Mint apart the Orange wheels IMO