Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Forum User Allan's Avatar
    Join Date
    Mar 2005
    Location
    Williams land!
    Posts
    2,509

    Pic request engine

    Looking for some pics of a williams / valver engine from the drivers side, going to do my cambelt tomorrow and i just want some pics so i know the bigger picture.

    Ta

  2. #2
    Forum User Dancliovalver's Avatar
    Join Date
    May 2005
    Location
    Pork Pie Land ;-)
    Posts
    2,648

  3. #3
    Forum User
    Join Date
    Jan 2005
    Location
    Midlands
    Posts
    8,253
    Haven't got any with pullies and belt on without the covers on.

    Its pretty easy, outside the pullies with teeth on, inside the 2 smooth ones.

    From bottem going with rotation of belt goes round outside of the crank pully, round utside of the aux idler (drives oil pump), inside of tensioner(you adjust the tension with this using an M6 bolt through the threaded hole on the block), up over the top of the 2 cam pullies, down and inside the idler pully, and back to the crank pully

    Haynes has a pic showing routing

  4. #4
    Forum User Allan's Avatar
    Join Date
    Mar 2005
    Location
    Williams land!
    Posts
    2,509
    Ah looked it up on the haynes and incase anyone else wants to look its pic 3.11 on page 2D.5

  5. #5
    Forum User Allan's Avatar
    Join Date
    Mar 2005
    Location
    Williams land!
    Posts
    2,509
    oh and thanks guys :D

    anyone got picutres of the bottom cover?

  6. #6
    Forum User
    Join Date
    Jan 2005
    Location
    Midlands
    Posts
    8,253

  7. #7
    Forum User arj256's Avatar
    Join Date
    Oct 2004
    Location
    Dunfermline
    Posts
    1,535

  8. #8
    Forum User Allan's Avatar
    Join Date
    Mar 2005
    Location
    Williams land!
    Posts
    2,509
    thanks guys it will all be of use :D

    just need to hall myself out of bed and actualy do it now as i couldnt be arsed this morning :D

  9. #9
    Forum User Allan's Avatar
    Join Date
    Mar 2005
    Location
    Williams land!
    Posts
    2,509
    well 9 and 1/2 hours later, some blood and cuts and the cambelt is done, amazingly it turned over and i ran it up the drive so seems to be working, but is squeeking a little when you put the power down, so might have to adjust the aux belt as that was done rather tight.

    P.S strut braces are nasty when trying to get the upper camcover off !

    Going out to make a start on my lights after some turkey curry :D

  10. #10
    Forum User
    Join Date
    Jan 2005
    Location
    Midlands
    Posts
    8,253
    Quote Originally Posted by Allan
    well 9 and 1/2 hours later, some blood and cuts and the cambelt is done, amazingly it turned over and i ran it up the drive so seems to be working, but is squeeking a little when you put the power down, so might have to adjust the aux belt as that was done rather tight.

    P.S strut braces are nasty when trying to get the upper camcover off !

    Going out to make a start on my lights after some turkey curry :D
    Oh yay!!

    You'vce set the time now, 9.5 hrs is the time to beat boys and girls

    Personally i'd be gutted if it took me more than 4-5 hours


 

Similar Threads

  1. Engine bay pics request
    By robi1000 in forum Pictures
    Replies: 45
    Last Post: 23-02-2012, 21:33
  2. Pic request: Top engine mount
    By Patrick_g46 in forum WilliamsClio Discussion
    Replies: 4
    Last Post: 25-05-2010, 22:23
  3. Pic Request: engine / sensor
    By freebone16v in forum Pictures
    Replies: 3
    Last Post: 23-04-2010, 09:19
  4. request--- your engine bay pics please.
    By flat-eric in forum Pictures
    Replies: 34
    Last Post: 20-09-2007, 21:15
  5. Pic Request....F7R Engine block!
    By Amirclio in forum Pictures
    Replies: 56
    Last Post: 10-12-2006, 23:29

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •