Washer Jets?

[dannyt]

Mine seem to be getting a bit tired in their old age and not really squiting very high up the windscreen, what would need replacing, is it the pump or the little jets themselves?

Cheers

Danny

[J o n]

it's usually dirt or that they have moved slightly... i used to use a pin on my XR2 to adjust them

[dannyt]

they point in the right direction but are just not very powerful!!! Ill try the pin thing though to clean them!

[J o n]

yeah, it will be just dirt m8, give it a go with the pin, it worked for me anyway... not tried it on the Willy, although the back one is tripe on mine... lol

[dannyt]

my back one doesn't even spray water, but you can hear the pump trying when you hold it back, will that one be blocked too do you think jebus?

[MatBrown]

Try blowing up the pipe with compressed air.



Mat.

[Swervin_Mervin]

Mine started doing fack all Danny after I had my new 'screen in. I disconnected everything and checked the pumps. Then I blew down the pipes. When I reconnected everything they were powerful as fook!

[dannyt]

will have to give that a try too then, is it an easy job then to take the pipes off and clean them out?

Danny

[Swervin_Mervin]

Just unclip the plastic scuttle, turn it over and disconnect the washer pipe from the pump. Then just blow hard!

[dannyt]

flippen heck, might get the girlfriend to do that bit....thats her job!

To disconnect the shuttle is it just clips of is there any bolts?