Induction Kit Help

[Piper]

Whats the best induction kit for a standard williams.

I was looking at getting a PiperX Viper kit but I can't see one avalible for the Mk1 willy ? On the PiperX webby they only offer their standerd kit not the viper version for all Mk1's. Any ideas?

Thanks

[richy]

if u want something like the viper u will need to contact brun off here, he was/is selling the adapters for the throttle housing, you can then buy a kit and some flexi/silicone pipe to join it on

[richy]

btw the best is proberly a std box with itg panel filter, and a decent feed to the bottom of the std box!

[cliolord]

btw the best is proberly a std box with itg panel filter, and a decent feed to the bottom of the std box!

Agreed

[Piper]

btw the best is proberly a std box with itg panel filter, and a decent feed to the bottom of the std box!

But will that give me the nice sound of a induction kit ?

[cliolord]

yes. If you drill some holes in you airbox but to be fair mate there is not much point in making a racket....Removing the airbox removes the inlet silencer just liek when you add an exhaust it removes the exhaust silencer in a way. The more holes you drill the louder the roar but then you will start getting heat soak. I would leave it but if you want to sell you original airbox to me, I will gladly buy it!!!!!!

[Piper]

Except for the sporty noise whats the point of getting an induction kit ?

[richy]

other then the noise not alot of point, under bonnet temps get quite hot on these cars! and with the airbox just infront of the rad wont help at all, which is why everyone opts for the std box with panel filter and a feed to it, much cheaper too!

[Piper]

Is this the right filter I need ? Looks the wrong shape etc to me

http://www.merlinmotorsport.com/prod...products_id=91

And when you say decent feed ?

Do I just make a hole in my bumper and duct it to the bottom of the filter box.. Is there any problems with rain with this. Any pics would be of great help :P

[richy]

next to the n/s fog light is a blanking plate, u can take it off from behind and fit a pipe from there to the airbox pipe, just helps with getting cooler air in then that of the radiator!