Results 1 to 9 of 9
  1. #1
    Forum User
    Join Date
    Apr 2006
    Location
    Sunny Blackpool
    Posts
    529

    **Engine Help Needed** Belt and Oil change

    this is quite serious because if i dont get this sorted in the next few days im not going to be able to insure and MOT it and im not going to be able to go to FCS. :( so im open to any suggestions and help that may be offered.

    basically as i posted in my other thread i've had someone who i trust a lot give the engine a very quick once over and he says the tappets are tappety and it may have a bit of piston slap.

    can anyone explain what exactly that means, how much am i looking to get it fixed and could anyone off here do it for me?
    they'd have to be at least in the NW if not local to blackpool & fylde/preston area because im in the middle of doing the rear brakes and cant drive it anywhere.

  2. #2
    Forum User clowo16v's Avatar
    Join Date
    Jun 2005
    Location
    Barnsley
    Posts
    1,843
    Just leave it it'll be fine for FCS.

    To fix them both requires an engine rebuild.

    Matt

  3. #3
    Forum User
    Join Date
    Apr 2006
    Location
    Sunny Blackpool
    Posts
    529
    is it going to be ok to drive though? luckly i have a works car, so the valver isnt going anywhere at the moment.

    could i even get away with some track time in it the way it is? or would that push it too far?

  4. #4
    Founder northy's Avatar
    Join Date
    Sep 2004
    Location
    Williams Land Cars:
    Posts
    15,204
    most williams and valver engines are tappetty mate

    yours will be as its not been run propally for a while.

    do the breaks and get it to FCS then you will know what needs doing once youve given it a proper drive.

  5. #5
    Forum User clowo16v's Avatar
    Join Date
    Jun 2005
    Location
    Barnsley
    Posts
    1,843
    It won't blow up no it should be fine, even for track time. I'd leave it for the time being but buy a good spare engine when you can and replace it when you've got time.

    Matt

  6. #6
    Forum User
    Join Date
    Apr 2006
    Location
    Sunny Blackpool
    Posts
    529
    nice one guys, u've put a few of my fears to rest.

    i was really worried id be driving down the motorway or even pushing hard round the track and end up seeing my bottom end bouncing off the road and covering the poor sod behind :D

  7. #7
    My mates 1.8 Escort had piston slap, he drove it like that for about 15k miles before bothering to change the engine, still nothing was actually wrong with the engine apart from that, still pulled perfectly well.

    Id say you will be fine :D

  8. #8
    Forum User Purple's Avatar
    Join Date
    Nov 2004
    Location
    103.94E/1.31N
    Posts
    2,066
    Quote Originally Posted by rt_blackpool
    i was really worried id be driving down the motorway or even pushing hard round the track and end up seeing my bottom end bouncing off the road and covering the poor sod behind :D
    You are worrying unnecessarily. Even brand new Renaults will do that without warning.

  9. #9
    Forum User
    Join Date
    Apr 2006
    Location
    Sunny Blackpool
    Posts
    529
    Quote Originally Posted by Purple
    Quote Originally Posted by rt_blackpool
    i was really worried id be driving down the motorway or even pushing hard round the track and end up seeing my bottom end bouncing off the road and covering the poor sod behind :D
    You are worrying unnecessarily. Even brand new Renaults will do that without warning.
    lol :D

    so now we've got that out the way, i need an oil and filter change and also a new aux belt putting on.

    any recommendations for for someone or a garage blackpool/preston way that can it for me and do a good job


 

Similar Threads

  1. cam belt change engine in engine out
    By shag in forum Mechanical
    Replies: 5
    Last Post: 08-06-2010, 21:19
  2. CAM belt change!
    By Laine_16v in forum Mechanical
    Replies: 19
    Last Post: 23-03-2006, 18:41
  3. Cam Belt Change
    By Zollo in forum Mechanical
    Replies: 28
    Last Post: 04-11-2005, 19:58
  4. Cam belt change
    By NickFr in forum Mechanical
    Replies: 2
    Last Post: 15-03-2005, 13:39
  5. Cam belt change
    By NickFr in forum Mechanical
    Replies: 5
    Last Post: 09-03-2005, 18:49

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •