2.0ltr Megane Engine conversion, parts list???

[dannyt]

Can someone post up…..

A list of parts needed or preferred when changing an 1800 engine to a Megane BE and Valver Head?

For Example,

- 2.0ltr ECU, is this def needed and can it run off an 1800?
- Williams oil cooler bottom hose?
- Williams starter motor, can I use the valver one with megane bottom end?
- Which head gasket set, Williams/valver?
- Which clutch, Williams/valver?
- Head Bolts, willy/valver?
- Water pump, Megane?
- Engine mounts, would they be Williams, megane or valver?


Overall these are the ones I'm most confused about but if anyone can think of anything that’s needed or a good idea to get, as maybe difficult to change once the engines been swapped then please post and perhaps a MOD can put it as a sticky, if we don't have one?

Cheers

Danny

[Dan_mk1]

Im interested in this too, need to know how much work it is to swap over a megane bottom end onto a valver head

[northy]

- 2.0ltr ECU, is this def needed and can it run off an 1800? I would look to get yours remapped danny.
- Williams oil cooler bottom hose?
- Williams starter motor, can I use the valver one with megane bottom end? The williams has a specific starter. But if you are staying with a Valver gearbox i would see if your original still fits.
- Which head gasket set, Williams/valver? Depends on which head you fit
- Which clutch, Williams/valver? Again - depends on your gearbox
- Head Bolts, willy/valver? Think you can use either.
- Water pump, Megane? Not sure
- Engine mounts, would they be Williams, megane or valver? Stay to valver and williams mate.

[2 live]

Can someone post up…..

A list of parts needed or preferred when changing an 1800 engine to a Megane BE and Valver Head?

For Example,

- 2.0ltr ECU, is this def needed and can it run off an 1800?......get urs re-mapped
- Williams oil cooler bottom hose?
- Williams starter motor, can I use the valver one with megane bottom end?.......IIRC if ur using the valver f/wheel, u can use the valver starter
- Which head gasket set, Williams/valver?.......willy/meg...the bores are bigger
- Which clutch, Williams/valver?.....again....williams...can handle mopre power
- Head Bolts, willy/valver?.........both same
- Water pump, Megane?all same i wudda thort
- Engine mounts, would they be Williams, megane or valver? valver/williams


Overall these are the ones I'm most confused about but if anyone can think of anything that’s needed or a good idea to get, as maybe difficult to change once the engines been swapped then please post and perhaps a MOD can put it as a sticky, if we don't have one?

Cheers

Danny

[Dan_mk1]

So will the engine run on a 1800 ecu with a 2ltr bottom end?

[stew]

with a remap or chip yeah.

mine is a 1800 ecu, chipped to 2000 spec with the Hillpower stage 1 chip!

[Dan_mk1]

What about if i dont get it remapped, willl it still start etc?

And how involved is swapping the BE's over?!

[u33db]

1800 ECU will run a 2ltr but will been lean top end...you'll get away with it for while tho as long as your not caning it everywhere.

[Dan_mk1]

Ah ok, coolio! Sorry to hi-jack Danny! lol

[stan]

- 2.0ltr ECU, is this def needed and can it run off an 1800?
- Williams oil cooler bottom hose?
- Williams starter motor, can I use the valver one with megane bottom end?
- Which head gasket set, Williams/valver?
- Which clutch, Williams/valver?
- Head Bolts, willy/valver?
- Water pump, Megane?
- Engine mounts, would they be Williams, megane or valver?

2.0 spec ecu
if u want OE oil cooler u need appropriate hoses
williams/megane headset and bolts (not 1.8 head gasket basically, and check cam oil seals as williams are different to 1.8/meg)
either clutch
water pump is same
clio mounts needed, valver same as willy