Search:

do you use a special silicone for exhausts?? what type and where from as i have the same problem...

i have cleaned up the abs rings in the past for better contact thats worked for me, just used a bit of sandpaper..

check the exhaust gases are coming out the tail pipe it could be that the catalyst has blocked

this may sound silly but have you enough petrol? or clamped off the fuel lines under the car??

i would not adjust anything if the car was running fine before it was taken out, i would say the problem is else where, as for the gear linkage i just marked it with paint before i took the engine...

you should try and clean up the abs rings on the back of the discs this should solve your problem they end up getting so corroded that a proper contact cant be achieved you can clean with a bit of...

just fitted one today it was a job and a half! didnt realise that it would need to be heavily modified, i had to cut the mount bracket down a fair bit it is now just attached to the side end of the...

i used to have another willy 3 it was n193drv i would love to know if this was the car you saw it was great would buy it back!!

check this out for low mileage!! couldnt buy a car let alone a porsche and never drive it the torment is not worth the money in my opinion!!
...

brilliant ta very much i knew someone on here would have the answers

whats the cheapest way to go about buying and fitting forth engine mount the one that attaches to the subfame, is there any inside knowledge??? any advice really welcome..

it will be the gearbox linkage you need to slacken of the nut and turn the lingage either clockwise or anti clockwise, jack the front of the car up then it will be easier to check the car going into...

yeah that be good just let me know when yr thinking and we will see what we can do, sell the 2 not the 3!!

yeah that be good just let me know when yr thinking and we will see what we can do, sell the 2 not the 3!!

cant get on that site, how do i go about paying??

its ok had the wheels re-furbed the back arches are on there way, and the usual stone chips on the front but its only done 55k with full history will get round to getting straight though its a...

yrs looks really nice, had any troubles with it??

twas me! i live in dinas we have spoken before..

sounds to me like the wire that goes to the lambda sensor on the exhaust yo can disconect further down new the power rack

i recently had my crank re-ground and they also supplied the bearings this cost around the £150 mark, had the head also skimmed for an extra £30, as for the oil pump i changed mine but reno only im...

have you bought a willy now??

have you bought a willy now??

cheers ta very much!!

as above do they fit mk1 clio cheers..

that looks very nice indeed what garage do you work at might want to bring my car in for a little work!!

cheers for all the advise

cheers guys, shacks i tried the ones without the abs ring on the back but the metal casting is to big to transfer the ring from the old ones, i know what you were thinking i thought the same just...

does anyone know where i can buy rear discs with the abs ring on the back! its for my williams 3 looked on a few sites but there around £120 would like some cheaper..

cheers will keep you in mind, 8) thanks for the cd not had chance to use it yet going to put it on my old computer because of the file size.

wheels on the avtar are just 15 inch williams