Search:

I would have a story to share about this fellow. It started 2++ years ago as we agreed he to build top spec engine using still original ECU (due to class limitation). I bought used engine & box + all...

Link look not to work, do anyone have these to share?

Do you happen to know part number for "R5 Express 23,5mm spring torsion bars"

And where you have got "Thicker anti roll torsion bars" in rear?

Are you using anti roll bar in front at all?

Does anyone has experience of this French made disk for Willy box?
...

Looking for tuned complete engine. Just one restriction, engine management should be based on ordinary chip system (modified chip).
Please send spec & price via pm.

Also gearbox considered if...

I inquired catcams about good cam for track Willy where chip can be programmed and headwork will be done. They recommended 5502358 where mechanical followers will be used and naturally adjustable...

Would anyone be able to set up group buy for stiffer rear suspension as it does not just make good to update fronts. Ok, you may use some a bit thicker van torsion bars but how about ARB, and then...

Did few track days during summer and now I am need to have rear suspension improved. Suspension does have KW competition 2-adjustable shocks & front is with coil overs (350 lbs springs, road legal...

19 16V is wider. It is perfect combo:
- Scenic front hubs + Scenic bigger disks + Scenic bigger brakes + Ferodo DS2500 pads
=> makes wider front wheelbase, original driveshafts are too short
- add...

Still looking for one additional box.

Looking for 2 Williams airboxes, can be with or without air filters. Please PM if you have one or two available.
R. Harri

Thanks, exactly information needed. Looks like R19 16V may be usable, not far from 172 length.

What did happen already is that one shaft popped out of gearbox (original Williams) but luckily did not break anything else but dogbone once engine was pushed sideways. Hence, I would prefer to...

Thanks guys, then hunt is on for 172 shafts. Do you know if 1.2/1.4/1.6 shafts are similar to 2.0. Those would be so much easier to find than 2.0/Sport shafts?

Just installed upgraded brakes to Williams 2 - 172 front hubs and calipers and that makes track width wider than original Willy width. Already noted that Williams drive shafts are possibly too short...

I have done nearly the same as "Stan", spherical bearing, camber adjustable top-mounts. But top mounts were for Mazda 323, they are 4 bolts, so I have made special 3mm plate and welded it to top of...

Can you rise rev limiter with SMT6?

How about free modification of fuel and ignition maps. If all that can be done, SMT6 sounds like perfect product :wink:

Exactly what kj said, I've been sending mails to him w/o reply so future support is more than questionable. :shock:

Sorry, a bit offtopic, but what is "plate bolt" thread? I bought one year ago and bolt did not fit :(

I had funny leak source. That steel cover in left side of box, steel "pot" has rusted and had very small holes and when oil got hot, it started to leak. Simple to fix if that is the trouble.

Thanks Richy for info! Then I may go for 172/182 front disks and find suitable 4 pot calipers with self made mounting bracket.

Do anyone know if Clio 2.0 16V Sport brake calipers and disks fit into Williams? That would be good and easy brake upgrade as Sport has 280mm dia and 24mm thickness instead of Willy 260/20mm.

Can anyone tell, what are length (MIN & MAX) of Williams 2 original front coilover and rear shock?
Front: from bottom fixing bolt center up to top of shock nut
Rear: distance between fixing bolt...

Looking for track suspension to my Williams 2. Prefer some quality brand and shocks to be adjustable. New or second hand.