Hello.
Ive had a problem with water running behind the fuse box in the passenger footwell.
on removal of the dash, I’ve noticed the two thin black wires from the immobiliser have corroded...
Type: Posts; User: bennv16
Hello.
Ive had a problem with water running behind the fuse box in the passenger footwell.
on removal of the dash, I’ve noticed the two thin black wires from the immobiliser have corroded...
Another 1er bites the dust then....
Thanks Paddy.
I'm in need of one of these in good nick if you can help? Otherwise are there any compatible parts from other cars?
Thanks. Got constant high idle after getting warmed up, stripped wire on that is...
I'm in need of one of these in good nick if you can help? Otherwise are there any compatible parts from other cars?
Thanks. Got constant high idle after getting warmed up, stripped wire on that is...
Whats better, original or patent?
Er, well ive got 4 bushes, all the same Which fit well. No space for the original spigot which fits inside the bush on the Renault original though
Also, on the outers, do I retain the metal washer/bush or do away with it? I have 4 bushes per side in the new kit. Assuming I do away with it? Thanks. Also saw a diagram showing track rod ends...
Proper stuck with fitting inner roll bar bushes - they were awkward enough to get off! Please could someone explain the knack required to get the bolts back in? The engine is still the vehicle. I...
Thanks very much, thought I had the right ones.. so far every part I have ordered from EuroCarparts has turned out to be wrong, costing me a lot of time 😡 still got the fuel filter to fit, if that...
I need some outer rill bar bushes for a 94 1.816v. I keep seeing large looking bushes with a square section on them.. I dont need these do I? I need the washer shaped bushes for the outers.. are...
Hello. Someone has kindly put a hole in my radiator on an M reg Clio 16v. I'm buying a replacement and I need to know whether there's a difference between ph1, ph2 and Williams fitments\products?...
It could be, already fitted one of those though... Would make sense. thanks
Hello again, thanks for your help previously.
I'm putting the cams back in the clio following a head gasket and cam belt change. Should I have a gasket between the head and cam housings? or should...
So there is. I remember it being there, top left, not on this car though.
Well I didnt take an o-ring off, but my mechanic mate reckons it goes in the block apparently, cos of some sort of...
Hello.
I'm putting my clio 16v back together and have a few questions.
Firstly, I've fitted a new water pump, no idea where I should have put the O-ring that came in the pack though. The only...
Thanks very much
I need a water pump for a 16V 94 m reg. Is it the one off an Rsi o r would a Williams or 1.8 19 one fit? I also have a superchips ecu, but need a new carrier for it I think to solder to my existing...