anyone know the weight of a valver engine just to see if/how much it would cost me to get one shipped from mainland to northern ireland?
Type: Posts; User: lee-8ballauto
anyone know the weight of a valver engine just to see if/how much it would cost me to get one shipped from mainland to northern ireland?
bump still looking...
i think i have one ill check
how much you looking say 20 quid?
needing one of these for a valver as the willy manifold i bought makes my valver downpipe sit too close the floor.
10mm on mine
sorry for hijack but im also looking a willy downpipe if anyone else has one.
there is some scrappers on the site but there is some that dont deserve it lol mines (yaris) been on it about 3 times already
boot is just wee bit too much the rest looks sweet. phs2 taillights look wrong with the boot
i had same problem it turned out to be water on the plugs, had filled up in the holes where they sit
ok thanks for the help everyone.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=011&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=320116973817&rd=1&rd=1
the manifold i bought is not the downpipe too. i have already cut and welded the decat to the right length and angle but the downpipe site about an inch off the ground so it needs shortened or...
said on the auction it would fit?
ok so i got a ktec manifold off a guy on ebay so i went about stripping the standard one out and replacing it with the new one so i got the new one in after about half an hour of messing about only...
i have used normal paints on engines/brakes for years and never had a problem.
still waiting on reply to pm??
maybe mainland halfords sell it but they dont in ni. and as for spraying a sealer on it they would probably ask you what type of paint you used to prime it with.
no bother thanks
all the earths have been replaced with new ones
has anyone else decatted theirs and ran standard backbox? i have with mine and it sounds terrible there is horrible rattle about 2.5k-3krpm anyone had this themselves or can give me a clue as to what...
hammer and screwdriver/chisel would have been better idea lol
have replaced all wiring to battery so couldnt be that. possibly just a dodgy batt light but was just trying to find out if it was anything else. the car does not start sometimes but if you leave it...
if your priming arch yourself it needs to be done with cellulose based paint which cant be bought from halfords. if you use acrylic based then it will react with the paint the bodyshop puts onto it...
ok recently my battery light seems to come on intermittently while driving and stay on for 5 mins or so. so i have done a process of elimination and changed all the earths in engine bay put new...
i have pm'ed you
tbh it looks like standard ride height. the wings are a lot smaller than standard wings and quarters look like they have been trimmed to match. not much use unless he rallys it.
none of the pics work. im possibly interested though
how much would rear bench seats and door cards be worth from phs1 16v their the blue and yellow detailed ones.
lmao at the 1.2 rubstrip :lol: :lol: