Hi folks,
Having major issues getting hold of a rear brake bias for my Williams 3. I have purchased 2 so far only to be refunded by both sellers as they couldn't source one.
...
Type: Posts; User: dannyboy3767
Hi folks,
Having major issues getting hold of a rear brake bias for my Williams 3. I have purchased 2 so far only to be refunded by both sellers as they couldn't source one.
...
Thanks lads, have tried the corsa ones but there just not 100%. I'll keep an eye for VW ones. I have 2 off a 16v but there both bubbling with corrosion aswell.
Yeah I've been lookng in scrap yards but the phase 1 is rare now even a standard 1.2. I wrecking I'll come across one that's the same that can be shortened.
Hi everyone,
Finally getting my Williams 3 back together after 9 years of restoring it. The only thing that's bugging me is the little trim that's in the rubbing strips on the...
Hi people could I please have a copy sent to danielwhelan2006@gmail.com. Restoring a Willian's 3 in Ireland for the last 8 years. Time to put her back together 👍👍
Right lads which is better. Ive just about got the willy 3 ready to be built back up. Ive been reading on here that some just take out ABS altogether. I have a valver here and can use all the non ABS...
Did you find the problem, havent been on in a while ill try send you a pic of the ECU if you still want it. THe car runs fine its just crap idle when cold
True 16v_paddy they are thin alright but if you weld an inch and then cool it with an airline it will be fine just move to the other side and do a bit. never stay in the one place.
I have a willy 3 and it was doing the same, after alot of new parts it turned out to be part of the ecu had burnt out. I took it apart and could see straight away where it it had burnt out.
It can be done, I done a mark ii escort about 2 months ago. Just takes time. It wont sink if its done propper. It has to be seem welded or it will sink. Tried to add photos but it says my files are...
The only way to remove rust is to cut it out and weld in a new piece of steel. You can paint some rust killer on it but its a waste of time. If its not cut out it will come back.
Thanks for the reply, had a look at your post ur doing a great job on it. My panel is completely rotten right across so this won't work for me. I'll have to replace the whole panel.
Took the top off the dash and took out the windscreen and the top of the bulk head is rotten, has anyone ever bought or replaced this panel. any help would be great thanks.
sorry for late reply, Both cars are 95 so im hoping the looms are the same. The 16valve has a different immobiliser that might be a problem.
I was thinking that alright, it's just that I have a rotten Williams and a decent 16 valve shell so I'm going to put everything onto the valver shell. I thought I might just have to change the ecu...
Hey lads and lasses just a quick question, are the loom on the Williams and the 1.8 16v the same
Im a panel beater myself so making inner arches wont be a problem. Ill weld in all chassis numbers so it still looks original. I priced the quarter panels today and there 434 euro plus vat ha ha,...
Thanks for reply mate. Was thinking it would be possible to do it.. Sorry wouldnt sell it as there cant be many williams 3 left on the road. Im going to restore it back to showroom condition i hope.
Lads just wondering is this possible, I think my williams 3 is gone past repair as the rust is everywhere. Im in ireland and we dont have 16V or williams shells. I was playing with the idea of...
that was quick lol. thanks man.
Hello lads. Can anyone tell me where id get these 17" alloys from. I cant find them anywhere. thanks in advance
thanks for help lads i was really stuck, this site is brilliant. The alarm is clifford whats that one like. will it give trouble
fixed the alarm problem, there was a wire out of the top of it. the car is starting again thank god. I checked my ECU baz and your dead right there is a fried bit in it. where would i get a new ecu....
oh lads things just got worse, where is the ecu located. I took out a box behind the fuse board which turned out to be the alarm box. i disconnected it and hooked it back up when i realsed it was the...
think ive found the problem lads, it seems like there is no signal going to the idle control valve, why would this be. i fitted a brand new idle control valve but i think its just staying open too...
right lads ive fitted the new idle control valve and i have a major problem. When i start the car its going straight to 4500 rpm and staying there, i cant figure out what is wrong. the throttle is...
Thanks for that site, Thats exactly what i need, ive been searching google for ages trying to find them repair sections. :D :D :D
like i said being from ireland is the problem, cant get anything here for the williams or the valvers because they wernt sold here. I think id be able to cut out the section off an ordinary 1.2 clio...
Hi paddy thanks for the reply, Im a panel beater so im doing all the work myself. Have you any idea where id get the repair panels
hey lads where would i get rear 1/4 panel sections, the arches on my willy 3 are past repair. Im in ireland so getting parts is nearly im possible. Would renault be able to get them. please help