thanks, have replaced the bulbs but still no change. will check the resitance thingy, can i just join the two wires?
Type: Posts; User: Rory
thanks, have replaced the bulbs but still no change. will check the resitance thingy, can i just join the two wires?
thanks, have replaced the bulbs but still no change. will check the resitance thingy, can i just join the two wires?
i have recently bought a williams clio wich has a few problems. the worst problem is the speedo and rev counter lights dont work so i cant drive in the dark. i can find a fuse for it in the car. is...
thats cool, got worried when the MOT tester said its to low and i should get it sorted asap. thanks
i am geting low oil pressure, its fine when i start the engine and when im driving.
but after i drive it and it idles the oil pressure drops right down to just above 0. have i got a ****ed pump or...
Too late
thanks
is iit posible to leave the drive shafts attached to the box?
how long did it take u to do? ive done it on a 5 but not on a clio, do u have to drob the subframe and slide the gearbox out?
ive been having problems with the clutch.
some times its hard to get into first, wich i thought was cause of my engine mounts being ****ed and the engine not sitting corectly.
but ive relised if i...
i failed my mot on emmisions, the co is too high. i gave it a raggin first but didnt help.
i disconect the lambda while the prob was in the exaused and the reading stayed the same, i thought if the...
sorry m8, sold the lot. should be colect at the weekend, if not ill get back to you
peterborough
not a clue m8
ive sold the BB tuning Turbo down pipe
and throttle body adapter, so £300 for the rest
can u use a multi meter to diagnos ur lambda sensor as i think mines ****ed
kenwood kac 810d, Class D mono block 1600watt £100
FLI Loaded 400s 2 channel Amplifier
400 watts max, 100 watt RMS
as new £50
You can use the high and low pass filters on the amps
Pair of focal k2p components, no crossovers so would need to be bi amped (better way of doing it any way). £100
AudioControl DQT Digital Equalizer....
I’m selling my half built 1.8 16v turbo engine. Basically it’s a 1.8 block painted red, it has the head fitted but the cams have some slight surface rust on them were its been sitting in my garage (I...
will the hub off a clio RT be the same? the breakers near me have one for £12
pasanger side hub with good condition bearing
worth a try, thanks
i know but i dont get paid till the 25th and the noise is driving me mad
Is by any chance the hub and wheel bearing on the clio 1.8 16v the same as the 5gt tubo? bit of a long shot i know but im to tight to buy a wheel bearing and ive got a spare hub for the 5
i didnt know that, what would the compresion ratio be using them and would i need one of the expensive thicker head gaskets from BB tunning?
what bracket and belt do u use?
so i can fit the bracket and just pop the pump out?
or could i use the pump 2 power my charge cooler?
y does the pas pump need to be removed? i boght a r5 with a f7p engine, the engine was notp hooked up but it had the pas pump still atached. i only ask because i rebuilt the engine and am about...