Also i dont think that you will get more than 150-155hp and 18kg of torque...
Type: Posts; User: dimkais
Also i dont think that you will get more than 150-155hp and 18kg of torque...
45m/h is good for first gear and 130 miles for 6th :wink:
The sadev gearbox has extremely close ratio :wink:
I can help you with the ratios or anything else you want....
Something like that???
http://img1.putfile.com/thumb/11/32306291738.jpg
http://img1.putfile.com/thumb/11/32306291689.jpg
Depends on the other mods of the motor.
Depends on the cams you will use.
If you have top speed in 1st gear more than 70km/h then you cannot have good times in 0-60 as either you will have a...
Lower the head and thinner gasket i think
9300 :lol: :lol: :lol:
9k only for dyno and goes arround :twisted: :twisted:
Maxiboy,I think that you have the same internal with me (wossners and arrows :wink: )...
I use wossner high comp pistons and 14,1 to 1 c.r for 6 years without problems at all..
I couldn't do fast changes with the JC5 gearbox but now i use full throttle clutchless changes :lol: :lol: :lol: Its a little faster than std 8)
I have mine for sale as i sold my clio and i no longer need it....
I ve got one for sale :lol: :lol: :lol:
If you want to rev above 9k then you will have to put in VERY wild cams (more than 300deg),but in order to do something like that you will have to make many changes to the head.Also, if you keep the...
Launch control :lol:
I was revving 9.3k for over 2 years without problems :wink:
Ah and fault the degs of the cams.It is 320 and not 312.But we think that we would have better results if we use 320-12.5 in and...
I don't have a working speedo as my gearbox doesn't have an output got this....
:lol: :lol: :lol:
The dyno you see is with 6th gear from the 2k starting opening slowly the throttle and at the 5.5k i m pushing the throttle pedal to the metal :lol: :lol: :lol: i think you can hear it too.
Rich,i...
Forged pistons (13.9:1 c.r)
forged rods
lightened crank
ARP head bolts
GrA oil pump
Custon cams (312deg with 12.5 lift)
Kent (Chokolate made :lol: ) pulleys
kent solid lifters
kent double...
I was revving without problems at 9300 for a long time.So 9k easilly with these cams,otherwise i wouldn't use so wild set up.It would be useless :wink:
I dynoed today my clio with the help oF Gakisclio my car.This is a video from the dyno but the clio had too much power lose from the intake air as the dyno gives air as 50mph so the engine run...
I kno one for sale not very expensive :lol:
I think that this is the oil warning light.The one you are looking is below and right of the oil filter....
If you want i can sent you a pdf (i think) file that has ALL the gearboxes from JB1 to JC5 with ratios,final drives number identification etc... :) or i can post you what is says for JB3 and JC5...
Anyone kno if i can fit a crown wheel and pinion fron JB3 gearbox to my JC5?
Dimitris
Mine were correct tho...
He's 30miles from me :lol:
Rich, i got from raldes a set of yellow bushes for mine but finally as i already had the half powerflex (i didn't wanted half blue and half yellow) on already i gave them to gakisclio and fitted them...
Not always the strongest is the fastest....but i think that if you are talking for quarter miles times then i think that some NA would be quicker than that...
These rims are awesome.Is this a manifold from megane?
i got it 40 pounds :)