Search:

So if I remove oil pressure switch on Megane engine (this switch is near oil cooler) I can get reading of oil pressure?

Getting in the back of the engine where original oil pressure sender is...

Is this true?

http://www.shrani.si/t/L/13m/3W4wbS3P/oilpressuretest.jpg

Can someone give real picture that part of the engine.

Is this same on F7R-714 (megane engine)?

How much does it weight?

Can be...

I have Megane F7R so I have high impedance injectors and I thought they are all the same (megane and williams)

F7R injectors are low impedance?

I`ll make a picture with voltmeter ...

Here you can find lots of flow rates for different injectors

http://users.erols.com/srweiss/tableifc.htm

F7R injectors have 229cc/min and 16 Ohm

If you get map from different ECU you won`t have any use because some ECU uses decimal, some uses wider "specter" of points (more tables ....)

Idle AFR 14.7

Top power 12.5

Try to get this values

tnx

What are standard cams spec?

I need at least valve lift and duration of r19 16v

Tnx for help

I have to wait what kind of injectors i have bought 8)

Were you able to change the injectors because of this little diference?

Megane rods are looking weakest :cry:

I have Megane F7R engine with top feed injectors.

the code number is: bosch 0280155724 (new style)

Can I use bosch injectors top feed old style

Original injectors are high impedance 16ohm.
...

injectors part number please

You can live map with TunerPro F7R ECU (Fenix5)?

Can you please tell a little more about this?
What equipment...(notebook,OBD Cable ...)

What if it is F7R-714 with head ported and cams from R19 1.8 16v

Is it necessary to correct the ingnition timing or is enough if AR ratio is close to 14.7 at all RPM

Where do I have to check AR...

I need information how much play (tolerance) should be between crankshaft and main bearings and crankshaft and conrods bearings
on F7R-714 engine?

I am doing rebuild and I need those info

Tnx

Where can I find LSD for TL4 gearbox?

Any specific parts? ie head gasket Spesso ...

I am rebuilding F7R-714 engine and for start I will rebuild bottom end.

Should I use genuine Renault parts or aftermarket?
If aftermarket than from which company?

Are there ARP head bolts for...

I have same sound on my F7R-714....

Don`t know what is it

Huh lots of info

Yes I have megane 2l 16v

After new year I`ll go into serious search for F7R engine and if I won`t find any than I`ll try to find F7R parst listed or I`ll have to re-wire ecu...

Neil.W.

you have pm...

Yes, I wasnt criticising you :D Just letting you know! Your english is probably better than most English people anyway lol.[/quote]

np

8)

He`ll try with custom headgasket and if this won`t help then he`ll be searching for new BE

http://en.wikipedia.org/wiki/Renault_F-Type_engine

Any good?

Sorry

I don`t know all the technical words for all car parts.

Just trying to help ...

May be a speedo lambda in gb?

Exactly like this :shock: