Search:

The Chadil type on ebay are for a williams inlet port and need webber type fitting th bodies and have long runners which then when bodies are fitted only leave room for small trumpets. The Jenvy...

I can not remember for sure but I think there is very little difference between the two injectors a search for bosch injectors aon google and the injector part numbers and you will be able to find...

Cam carrier runners are slightlt different.

Wont fit a Williams

If you pipe the rear washer up with the front you can get both to work. On my own car I have fitted a washer bottle with twin pumps behind the bumper where the original air intake is taken from. We...

There's a link on e-bay to a bloke who has a 12 mile only rack .

Pretty sure i have one in the workshop. phone 01530 273633.

Got rewelded manifolds and s/hand downpipes in stock. Call the workshop on 01530 273633

Parts are going to be genuine . the guy selling them owns the Williams sprint car thats in our workshop and it does only have 12 miles on the clock as a road car.

High comp pistons will always give more power but the engine management needs altering to suit. The std ecu when reprogrammed can cope with h/c pistons. Forged pistons will be slightly noisier when...

We spent a lot of time on the development of this kit measuring all sorts of pressures and temperatures in various locations. The difference in air intake temp alone suggested the best place for the...

I HAVE FITTED BOTH SYSTEMS THE ONLY DIFFERENCE IS THE FLANGE POSITION IN RELATION TO THE CAT. BORE SIZES ARE THE SAME ON BOTH

You will more than likely find the differance is the white and red wires have been swapped around in the connector. Old trick that from the days of the Gtt.

Definately have one in the w/shop possibly 2 i think call me on 01530 273633.

Which 172 was that?

We can supply these Magnecor leads retail £62.15 Club price £57.17 01530 273633 www.hillpower.co.uk

Cams and followers? If you have fitted the valves ,springs and followers into the head and then fitted the cams the camshafts are opening the valves so they will be harder to turn. Take the followers...

The part you have highlighted in pink should be kept with the head it came from. DO NOT fit any from another head. The cam carriers (pink part) is align bored to the head when the two parts are...

Brun buy a Bosch lambda sensor. Had a few cars in with NGK sensors that have the prob you got.

The car is the one built for Bobby. It has his name still embroidered on the drivers seat.

The Clio 16v 1.8 manifold will give you better bottom and mid range torque so yes its better in that respect. The Williams manifold give us better top end power on tests on the rollers. If you fit a...

The megane runs a different type of ecu which is not interchangable dirrectly with a williams (Megane runs twin coil no distributor Williams ecu is only set up for one coil) plus other engine...

What is cheap? I have one on the wall in the w/shop.

I would have a diagnostic check done next, why spend money on parts if you are not sure they are broke? Trying to cure the problem by changing parts from the cheapest upwards could cost more in the...

Brun You've got a bitch of a job there mate. If you go second hand ask if the bleed nipple comes out before you buy it, if you are replacing the caliper it's got to be bled somehow!

I run the air filter of my Rsi engine 16v Clio same as the kit I do for the 16v. Works nicely.

As Brun said I have seen many cars with various lambda sensor fitted and in my experience the only one worth fitting is the genuine Bosch sensor for the vehicle. Not all of the clio range use the...

There are water hose kits , ignition kits engine covers etc see sellers other items

You would have been best to clean the block face when the pistons were out having the rings fitted then.

I have put some goddies on e-bay. Search in community for hill_power Car parts and vehicles.