Hi do you know where you can get a new screw sleeve that goes over the top of the terminal for the connector to screw on to? I have replaced the battery and the old one broke as I took it off.
Type: Posts; User: Nickysteveo
Hi do you know where you can get a new screw sleeve that goes over the top of the terminal for the connector to screw on to? I have replaced the battery and the old one broke as I took it off.
it arrived but the way the petrol cap connects on this one is at a different angle so no good for me
impossible to get a replacement reserve tank, have found someone scrapping a clio and the fuel tube is on its way.
Thanks very much for that, so I could do away with a reserve tank and get a replacement with just the filler neck?
Hi My Williams 1 has a leak in the small reserve tank, a slight crack in the plastic .
Does anyone have any info. on how to repair or replace it?
does the standard clio 1 have the same tank setup...
Sorry, of course it's not a carburettor, I mean the flap behind the air filter, probably a choke flap
Thanks , but when I cleaned the carburettor the fault went away, but gradually came back after a few weeks. Doiesn't that suggest it's the carb getting dirty? and if so why would it get dirty?
I have a problem with my williams 1.
The engine has started cutting out and stalling especially when going over bumps.
After checking my battery connections with no sign of a problem, I tried...
just a note on how I fixed this. I managed to find a clio 1, (not an easy thing now) and those fuel pipes were the same.
I found that my old fuel lines had been chewed in many places by a rodent...
The plastic fuel pipe from the filter has perished on my Williams mk1, the pipe is no longer supplied by Renault anymore :upset2:
Has anyone got any ideas where I can get a new one?
Does anyone...
Hi Jas
How did you get on?
I have a Williams 1 and have suddenly got a couple of fuel hose leaks. Did you replace (and run down the same route) all the hoses including the plastic ones?
Would...
Hi Edd
I'm looking for a few parts, wondered if you might be able to help.
Williams 1/valver fog light glass/foglight?
Williams 1/clio 1 battery clamp plate
and a Williams 1 gold wheel hub cap ...
Hi Paddy
Wonder if you have found the fog light glass/foglight?
Also was after a battery clamp plate and a gold wheel hub cap if you have any to sell?
cheers
Nick
Cheers paddy
let me know
Glad it worked out
Can you tell me what car did it come off?
I presume not a Williams, and the clio mk1 fogs don't look the same as the Williams mk1's
Hi I need to replace the glass on one of mk1 fog lights. can you tell me where you got the replacement from
thanks
Nick
Yes from what I remember it doesn't look exactly the same but could work
need to apply something because the movement in the battery causes the engine to cut out
I don't think there is any other...
Hi
Some numpkin has lost my battery clamp plate on my mk1. Luckily the long bolt is still there.
Does anyone know if the standard Renault clamp plate like one in the link will work okay on the mk1...
Hi Pete Only just seen this, yes I got it ok and it works fine.
Thanks for the info.
I wasn't working on it so not sure exactly where the leak is except at the steering shaft.
already tried a leak fix fluid in it, but it didn't work. I hear that usually these...
It looks like the racks have been discontinued, :-k does anyone know where I can get hold of one or any ideas of what to do next?
Hi
The latest problem on my Williams 1 is the steering shaft has a leek. :-(
Is it the case that you have to change the whole rack to fix that?
Does anyone know the best place to source a...
Thanks for that that Paddy
Hi
I need a brake power regulator for a williams1 part no 7700840561 , looks pricey from renault, would anyone be able to source one ?
cheers
Nick
thanks all
I managed to sort it out, and found the disconnected wire for the side indicator. cheers
Nick
Hi
I need a brake power regulator for a williams1 part no 7700840561 , would you have one?
cheers
Nick
Hi
I need a brake power regulator for a williams1 part no 7700840561 , would you have one?
cheers
Nick
Thanks guys
The people at Euro parts said that the front should NOT be vented and not 259mm.
So guess they were wrong, I'll use the Euro parts disks
thanks again
Hi
Does anyone know where I can get new from disks for my williams 1.
I have tried the usual suspects like europarts but they can only provide vented which are 20 mm bigger in diameter, than the...