Do you still have these mate?
Type: Posts; User: Brealbags
Do you still have these mate?
Anyone got any for sale ?
Ta
No doors going for sale mate?
Nice to meet you man. I was the guy you spoke to about the powersteering breather ;)
I posted up that I saw this the other day. I was driving through Lockwood near holme firth. Looked tidy.
Just seen that you had them replaced with new. Can you pinpoint where abouts it's coming from roughly? Is it cam belt related?
Is it that whistling noise? Very high pitched?
If it's still there without the belt on then it cancels out a lot of stuff
What engine is it? Could be cambelt idler if it's a 714.
You pulled the cam cover off and it was dry?
Supposed to have oil in there bud.
Saw this as you turned left at the junction near the casino. Somewhere near lockwood/ new mill
I was in a black merc didn't get time to read the reg but it's definatly somebody on here iv seen...
Do it when hot and cold.
Have you got access to a multi meter ?
If I were you I'd try the crank sensor first. Just remove it and check the condition of the contact. You could measure the resistance through it should be...
That test only shows if one lead is working at a time though. If it was the case that only one or two leads were down, it would splutter and missfire
Seen as it's just cranking I would say the...
Your already half way to getting the water pump out there pal. Just remove the powersteering pump and brackets and your game on.
However I would have pressure tested the cooling system with the...
If it's turning over and theres a smell of fuel then the injectors must be opening. Sounds like the plugs arnt firing.
All ignition systems ok?
Get it to fault again and check the coils not...
Ive got one and carried out the following repairs in a year
replacement gearbox
new master cylinder and brake servo
2 sets of door locks as the internals are made of stilton
window motor
...
Up to you I'd rather spend money on petrol than postage :wink:
Na it's not. Where do you live?
Say oil pressure sender and £30
Meet half way for it because posting stuff is balls
What do you need ? Oil pressure sender, any engine bits, exhaust etc ?
How much more cash do you want with an item of mine?
EDIT
Was it you how wanted the startr or did you want the oil pressure sender? Either way fancy making a swap deal happen ?
Swap them for the starter you wanted ?
And how come your injectors are in the head as per OE but the other set up has them in the manifold?
Is it just user preference? I see your manifold has the blanks where you could put them?
Where does your crankcase breather go to after the catch tank? There's another pipe coming off it. Or is it another breather off the engine ?
That's looks quality. Where abouts is this place I'm looking for a reputable bodyshop to do mine soon. Want somewhere with clio experience though
Can you use the standard OE brace with it ?
Wait until coolant is cold, remove cap
Should be ok just removing old sensor plug and screwing new one in but you will have to be quick. Coolant will run out when you remove it so just be ready...
Did that a few years ago. The ministry is too tight these days. I work at quite a high profile place
Yeah that's fine. My mot date is early next month but I might test it early anyway
I'm actually doing the test myself at work. (well, assisting)
I tried getting it through with no cat last year and it wouldn't go through the fast idle
That was a different engine though
Oh cheers Darren that would be great!
Il send you a message next week and arrange something. You can either come to the Porsche centre and drop it off or il come over to you on my dinner or...