could do but dont really want to mess with it too much. I like the one vent as it is :wink:
Printable View
could do but dont really want to mess with it too much. I like the one vent as it is :wink:
Ok for starters the 16v bonnet vent sucks air OUT, not in, hence teh bulge infront of it, it acts as an aerofoil creatig a low pressure area above the vent.
Secondsly there is alsmot no room between teh top of the inlet manifold and the bonnet
Thirdly, since the exhaust manifold is under the vent, as is the ionlet manifold, it will help to cool these items, meaning lower intake air temps
didnt know that, and true LoLQuote:
Originally Posted by Lunner
Rain catcher fits then?
No rain catcher doesn'rt fit, hence the being no room
gay, bought one for no reason then :roll:
I run the air filter of my Rsi engine 16v Clio same as the kit I do for the 16v. Works nicely.
The bulge on the bonnet is to create more air pressure as the air rushes over the bonnet, so when it goes through the vent, it is at a higher pressure thus more effective.Quote:
Originally Posted by Lunner
There is no logic in it blowing out as it would have to blow out against the air coming across the bonnet, and there is limited room to get air behind the engine to blow out..