Williams 1 (312) lots of Months welding.. ok over a year..

http://williamsclio.co.uk/forum/atta...tid=8675&stc=1 it started bad
http://williamsclio.co.uk/forum/atta...tid=8676&stc=1Then got worse
http://williamsclio.co.uk/forum/atta...tid=8677&stc=1then I felt sick...
http://williamsclio.co.uk/forum/atta...tid=8678&stc=1then I cried
http://williamsclio.co.uk/forum/atta...tid=8679&stc=1cried a few times....
http://williamsclio.co.uk/forum/atta...tid=8680&stc=1 Now I have a new floor and some where to bolt the fuel tanks
http://williamsclio.co.uk/forum/atta...tid=8681&stc=1Rolling shell ready for rear wheel arches:grin:

Quote:

---

Originally Posted by Andy Dossor

http://williamsclio.co.uk/forum/atta...tid=8675&stc=1 it started bad
http://williamsclio.co.uk/forum/atta...tid=8676&stc=1Then got worse
http://williamsclio.co.uk/forum/atta...tid=8677&stc=1then I felt sick...
http://williamsclio.co.uk/forum/atta...tid=8678&stc=1then I cried
http://williamsclio.co.uk/forum/atta...tid=8679&stc=1cried a few times....
http://williamsclio.co.uk/forum/atta...tid=8680&stc=1 Now I have a new floor and some where to bolt the fuel tanks
http://williamsclio.co.uk/forum/atta...tid=8681&stc=1Rolling shell ready for rear wheel arches:grin:

---

And i thot my w2 was bad....a lot of hours mate


Sent from my Pixel 2 XL using Tapatalk

Was it parked at the bottom of the sea?? lol

Superb work.

Good work,
I've got 313!

Great job, man! :)

Fair play!

Sent from my SM-G925F using Tapatalk

Yep...thats what they are like when the advert says "solid bodywork only a small amount of bubbling on the arches"

Regards Ian

Quote:

---

Originally Posted by ianbirch

Yep...thats what they are like when the advert says "solid bodywork only a small amount of bubbling on the arches"

Regards Ian

---

As ever Ian, you have it bang on 👍

Andy, I can sympathise with you, its a horrible feeling when you realise your project is far worse thn you could ever have imagined.
Looks like you are making some good progress, best of luck with it 👍

Hello Any

Another Williams owner hear and I see you have had some first hand exposure to the sad fact that these require alot of attention and I have a concern that you may be able to answer.

I very recently had a health check on my car at Renault and they have identified mine needs repair work done to the area of the underbody where the back axel bolts onto it.

Have you had to do anything similar to that

Mike

Hi Mike...send Andy a Private Message as this thread has been quiet for a couple of years.

Phil Walker on here is a good guy to talk to but you're more likely to get him on the Facebook page here...

https://www.facebook.com/groups/19431546816/?fref=nf

Regards Ian