Printable View
This section has been compiled by williamsclio members for the benifit of its users. It is the intention that this quick referance list will provide you your answer without having to search.
If you know of a part thats common between the williamsclio or 16v please post up below. A moderator will move the post to the master list asap.
for example
- The front brake pads for a williams will also fit the 16v.
northy
The rear brake pads for a williams will also fit the 16v.
Front springs are same on willy as valver
Pads/Discs inc bearings/Calipers are same on willy as valver (can also be found on pug 205 1.9 gti)
Wishbones are same on willy as valver(same as R19)
Ball Joints are same on willy as valver
thought the willy wishbones were different to the 16v longer 19 ones for the wide track, im prob wrong though
Yes Nyk is wrong, willy and 19 wishbones are the same due to the wider track, valvers are shorter.
I thought they were same, on my reciept it says wishbones 16V/Williams/R 19
Soz.
Foo!
I foresee a problem with this thread. :cry: It could become "an oh yes it is, oh no it isn't" pantomime. Is someone with access to Renault part numbers (dialogies or whatever they are called) going to moderate all posts?
I thought that but Northy said:Quote:
Originally Posted by cliopete
So once they have been verified they will get moved to the masterlist.Quote:
Originally Posted by northy
Mat.
16v and williams rear beam is the same, no matter what anyone says, part numbers match
Steering rack isn't the same, but 16v one fits and vice versa
Isn't this thread a bit of a waste of time considering that Willies and 16V's are exactly the same car, minus a few parts here and there. C'mon Willy owners, admit it, Willys are just stroked 16Vs with a tad wider front track! :razz: After all the argueing has been sorted out you're just gonna end off with a dead thread consisting of a very short list.
How about expanding it to all the Clio range? For example: Clio 16v, RSI, Williams, R5 GT Turbo, GTX, and Peugeot 205 GTI , all share front callipers and pads.
agreed, my hybrid is pretty much a williams got the widetrack and engine, only thing is i've got a sunroof :(
does this wider track on the willy mean ...
williams and 16v have different drive shafts
the williams one being a tad longer or
have i just cocked it up good an proper ?? :lol:
Yes williams driveshafts are longer.
They are the same as 19 16v driveshafts.
widetrack requires:
willy/R1916v wishbones
Willy driveshafts, can use one R19 one but can't remember which
Willy ARB, and obvously bushes to match
Only one side is the same iirc.Quote:
Originally Posted by Laine_16v
Mat.
Is there an echo in here :wink:Quote:
Originally Posted by MatBrown
also the other problem is renault themselves. as with the oil pump. 16v and williams had different oil pumps but now there is only one part number and only one pump availaible. lots of other parts are now discontinued or repacked or labeled so they seem the same.
Hehe,Quote:
Originally Posted by Lunner
Didn't read your post properly.
Mat.
what about the steering rack ???
is that same in all clios inc 1.4 etc ?
if so can a p/s rack be swapped with a manual one ?
theres thousands of parts that are the same.
the front pads,
williams are the same as the 16v, also the same as the rtsi's, and the 1.4's with girling pads, which were also used on some jag xj40 rear axles.
Rear pads are the same on the williams, rsi, 16V, megane, 19, 309, 205, 206 and so on.
rack is the same on the 1.2/1.4's as the 16V, the willaism has longer track rods.
and yes its a thread would go on forever.
r19 16v arb is same as willy arb
it would be a lot easier an a shorter list to make of the parts that are different!
172 springs are the same as Willy springs.
You can use 172 Cup springs instead for a small drop (c. 5mm) (and increased stiffness??)
i didn't know that. I want a 30-35mm drop on the front (i have gmax shocks) will using the 172 springs allow a 30mm drop on the front compared to standard 16v springs?Quote:
Originally Posted by white16valver
Why don't you just buy normal lowering springs, or get some springs made up to fit 30mm lower at a nice high poundage
Probably a very stupid question but im guessing that the williams rocker cover gasket is the same as a valver one? :oops:
Correct.
The 19 16v isn't quite the same but can also be used.
Mat.
Is there a difference in the gearboxes on the willy compared to the valver?
yes willy box is JC5 and stronger than valver JB3
Ive got a willams in my garage at the moment, number 151 on an L plate, i also have a 205 1.9 gti, 106 gti, 306 gti6, 309 gti and a 206 gti (too many cars i know) the rear calipers are the same on them all, the caliper yokes and pads are different on the williams, the pug calipers dont have the retaining screws for the outer pad.