-
Clio valver breaking
Have just bought a Clio valver to cut the arch out of to repair my williams. There were still loads of parts on the car which I have now started to take off.
I have removed so far:
2 x seat rails
wiper linkage and motor
blower motor
idle control valve
throttle body
both front hubs including calipers
pair of rear lights
ph2 bump strips
ignition barrel
dash support frame
heater matrix and retaining/distributor box
mongoose cat back (think this will fit a williams?)
there are a few more bits I haven't got around to listing yet such as the rear beam and quite a few other parts!! Please don't hesitate to message me if there is something in particular you are after and I will see if I have it :).
-
-
-
Responded to all pms so far :)
-
-
-
Poor ol' valver! There must be a few going the way of Williams parts bins :(
-
Yeh unfortunately it is in so many parts and so much missing from it that it would be a nightmare to get her roadworthy again :(.
-
Hi mate, whats the rear of the car like rot wise?
-
Not too bad, depending on what you're after?