screws for plastic engine cover

Printable View

13-04-2020, 19:04
maxwilliams

screws for plastic engine cover

I have recently sourced a replacement engine cover but I haven't any screws.

Could anyone tell me which ones I need please? I have found this https://www.gsfcarparts.com/017vg0330 but not sure if it's correct.

Thanks in advance
13-04-2020, 19:43
ianbirch

Which engine cover do you mean... put a pic up.

If its the spark plug cover those are incorrect as they should be plastic and are no longer available, though you might be able to get them
from Youngtimers in france.

Regards Ian
13-04-2020, 19:48
maxwilliams

Quote:

Originally Posted by ianbirch

Which engine cover do you mean... put a pic up.

If its the spark plug cover those are incorrect as they should be plastic and are no longer available, though you might be able to get them
from Youngtimers in france.

Regards Ian

This bad boy https://youngtimersclassic.com/gb/cl...302433094.html
14-04-2020, 12:55
ianbirch

2 Attachment(s)

Quote:

Originally Posted by maxwilliams

This bad boy https://youngtimersclassic.com/gb/cl...302433094.html

Sorry don't know the part number but it's a torx T20.

Attachment 9497

Attachment 9498

Regards ian
05-06-2020, 19:31
Jazzasingh

I think they are plastic. Watch on youtube salvage hunters classic car S04E02
They had some made using a 3d printer
06-06-2020, 00:48
16v_paddy

Quote:

Originally Posted by Jazzasingh

I think they are plastic. Watch on youtube salvage hunters classic car S04E02
They had some made using a 3d printer

I think everyone on here has seen that episode and spent a lot of time shouting at the TV :lol:

A guy on the facebook group has had them 3d printed as well but they are available from here https://www.boutique-bordanova-sport...serie-origine/
06-06-2020, 09:25
ianbirch

Quote:

Originally Posted by Jazzasingh

I think they are plastic. Watch on youtube salvage hunters classic car S04E02
They had some made using a 3d printer

The original poster did not mean the spark plug cover, he meant the manifold cover and i have already shown the correct fittings.

Regards Ian
09-08-2020, 09:53
Ashley79

Does anyone have a spare one of these? I broked one 😂 Brittle little things. I looked on eBay and the site suggested. Bit prices to get from France at 15-20 euro postage. I like the idea of a 3D printer to make one
09-08-2020, 21:07
16v_paddy

Quote:

Originally Posted by Ashley79

Does anyone have a spare one of these? I broked one  Brittle little things. I looked on eBay and the site suggested. Bit prices to get from France at 15-20 euro postage. I like the idea of a 3D printer to make one

Scroll through the site & see if anything else takes your fancy, I've been doing that on Bordanovasport and the youngtimers classic sites for a while now, I've bought so much stuff I had no idea I actually wanted or needed it's crazy :lol:
10-08-2020, 09:03
Ashley79

I have added a few things to the basket... I also bought a 3D printer so might just start making my only little bits when they break. good websites though. Have the heat shield and plastic screws etc. Will do the same and buy a few bits cheers.