Group A Induction Kit Relocation
Okay, my new shiny garrett turned up yeaterday....but it doesnt fit! :( so i have to send it back monday with the old unit parts so they can match up the bits that dont fit and re-ship it back end of the week!
Untill then i thought i'd keep myself busy with ongoing improvements, so i relocated my induction kit into the scuttle today! 8) all i need now is to wait for my 'new' (ahem) washer bottle to show up and am away!
Ended up using a drill and file to make the hole as i wasnt prepared to fork out for a hole cutter and wasnt keen on the grinder plan due to spark! results as a bit of a wobbly hole, but the silicone tubing will hide that! sprayed it up xeros aswell to prevent the dreaded rust taking hold!
http://i14.photobucket.com/albums/a3...o/P9010022.jpg
http://i14.photobucket.com/albums/a3...o/P9010023.jpg
and the liner to keep it lookin neat, just cut a piece of 5mm tubing along its length n fits lovely n snug!
http://i14.photobucket.com/albums/a3...o/P9010024.jpg
http://i14.photobucket.com/albums/a3...o/P9010025.jpg
and fitted the silicone tubing through the new hols i cut
http://i14.photobucket.com/albums/a3...o/P9010026.jpg
and the cone fitted on the end, its lookin a little tatty from years stuck in the bay, nearly won a pipercross replacement on the bay but got pipped by 50p in the last second!doh, so on the hunt still!
http://i14.photobucket.com/albums/a3...o/P9010027.jpg
I then set about making up a bracket for the chargecooler header tank to relocate it with the parts i had, again in attempt to do this all for the sum of free! :P
http://i14.photobucket.com/albums/a3...o/P9010028.jpg
sprayed up the bracket xeros aswell, its off a set of brakes from my old valver i had left over 8) bolts beside the coil, job done!
http://i14.photobucket.com/albums/a3...o/P9010029.jpg
and the finished article with scuttle in position!
http://i14.photobucket.com/albums/a3...o/P9010030.jpg
Coops