Hi guys I've rebuilt my engine with the following components, whats results should I expect?
https://s15.postimg.cc/5bd24956z/IMG...414_183602.jpg
F7R 700 block (std)
Std piston with new piston rings (Goetze)
Megane F7R 710 rods
ARP rod bolts
ACL Race rod bearings
Kolbenschmidt crank bearings
New oil pump bearing
New oil pump with Group n spring
F9Q crank fully balanced with flywheel (adapted)
https://s15.postimg.cc/gp4nciol7/IMG...326_134926.jpgpic upload
Flywheel (less 1kg)
Cylinder Head ported and polished, new exhaust valves and valve guides.
Head port natched with gasket and exhaust opened to 40mm
https://s15.postimg.cc/l9qtr5ihn/IMG...427_234127.jpg
https://s15.postimg.cc/97qe0f5nv/IMG...427_212630.jpg
Intake manifold port gasket also.
https://s15.postimg.cc/bp774c617/IMG...430_163536.jpg
https://s15.postimg.cc/isf2k1j7f/IMG...430_163546.jpg
Megane cup exhaust manifold 4-1 with 60mm internal exhaust line.
https://s15.postimg.cc/i2wa803bv/megane_cup01.jpg
https://s15.postimg.cc/z3f6gf8kr/IMG...326_142612.jpg
https://s15.postimg.cc/h0m3p9hvv/IMG...628_183104.jpg
https://s15.postimg.cc/uhj285fcr/IMG...628_154321.jpg
Megane cup vs Ktec
https://s15.postimg.cc/3jp56ohxn/IMG...326_140334.jpg
Primaries difference:
Megane cup
https://s15.postimg.cc/3kz2zjtvv/IMG...326_142856.jpg
Ktec
https://s15.postimg.cc/3xqh5shbf/IMG...326_142928.jpg
Catcams 5502225.
With this, what result should I expect in therms of HP?