Scuttle located Induction Kit
Hi
I've been doing some reading (and watching on YouTube), but can't find out all the information in one place, or one forum, so can anyone help please.
From what I can gather there are two ways to do this mod.
1. Straight from the TB to the scuttle with an IK on the end.
2. V6 airbox (or Renault 21 Turbo) then a scoop in the scuttle.
Is there a difference between the two ways? Any gains to be had between the two methods? The only thing that I can think of is that #1 will be louder than #2. (As the filter is right up against the bulkhead).
So, what parts are needed if we look to do #1 (aka HillPower setup)? Well from what I can gather you need...
1. x2 45º silicone pipes plus clips
2. Straight alloy tubing
3. IK
4. TB adapter
5. Washer bottle from a Vauxhaul Nova
The areas where I am struggling is where do you get the TB adapter from? Secondly, is there a part number for the Nova washer bottle? Or do you just go to Vauxhaul parts and say "I want a washer bottle for a Nova?" And finally, what diameter is the pipe/tubing/silicone hoses?
Final, most important question... just how loud will this be? :twisted:
Thanks! :)